Tensile deformation and fracture properties of a 14YWT nanostructured ferritic alloy

Alam, M. Ershadul; Pal, Soupitak; Fields, Kirk; Maloy, S. A.; Hoelzer, David T.; Odette, George R.

doi:10.1016/j.msea.2016.08.051

Title: Tensile deformation and fracture properties of a 14YWT nanostructured ferritic alloy

Journal Article · Sat Aug 13 00:00:00 EDT 2016 · Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing

DOI:https://doi.org/10.1016/j.msea.2016.08.051· OSTI ID:1330546

Alam, M. Ershadul ^[1]; Pal, Soupitak ^[1]; Fields, Kirk ^[1]; Maloy, S. A. ^[2]; Hoelzer, David T. ^[3]; Odette, George R. ^[1]

Univ. of California, Santa Barbara, CA (United States)
Los Alamos National Lab. (LANL), Los Alamos, NM (United States)
Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

Here, a new larger heat of a 14YWT nanostructured ferritic alloy (NFA), FCRD NFA-1, was synthesized by ball milling FeO and argon atomized Fe-14Cr-3W-0.4Ti-0.2Y (wt%) powders, followed by hot extrusion, annealing and cross rolling to produce an ≈10 mm-thick plate. NFA-1 contains a bimodal size distribution of pancake-shaped, mostly very fine scale, grains. The as-processed plate also contains a large population of microcracks running parallel to its broad surfaces. The small grains and large concentration of Y–Ti–O nano-oxides (NOs) result in high strength up to 800 °C. The uniform and total elongations range from ≈1–8%, and ≈10–24%, respectively. The strength decreases more rapidly above ≈400 °C and deformation transitions to largely viscoplastic creep by ≈600 °C. While the local fracture mechanism is generally ductile-dimple microvoid nucleation, growth and coalescence, perhaps the most notable feature of tensile deformation behavior of NFA-1 is the occurrence of periodic delamination, manifested as fissures on the fracture surfaces.

View Accepted Manuscript (DOE)

View Accepted Manuscript (Publisher)

Cite

Export

Save

Research Organization:: Oak Ridge National Laboratory (ORNL), Oak Ridge, TN (United States)

Sponsoring Organization:: USDOE Office of Nuclear Energy (NE)

Grant/Contract Number:: AC05-00OR22725; FG03-94ER54275; #00119430 8-442520-59048

OSTI ID:: 1330546

Alternate ID(s):: OSTI ID: 1399033

Journal Information:: Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing, Vol. 675, Issue C; ISSN 0921-5093

Publisher:: ElsevierCopyright Statement

Country of Publication:: United States

Language:: English

Citation Metrics:

Cited by: 36 works

Citation information provided by
Web of Science

References (23)

Recent Progress in Developing and Qualifying Nanostructured Ferritic Alloys for Advanced Fission and Fusion Applications Odette, G. R. JOM, Vol. 66, Issue 12 https://doi.org/10.1007/s11837-014-1207-5	journal	November 2014
Tensile and fracture toughness properties of the nanostructured oxide dispersion strengthened ferritic alloy 13Cr–1W–0.3Ti–0.3Y2O3 Eiselt, Ch. Ch.; Klimenkov, M.; Lindau, R. Journal of Nuclear Materials, Vol. 417, Issue 1-3 https://doi.org/10.1016/j.jnucmat.2010.12.066	journal	October 2011
Effect of bulk oxygen on 14YWT nanostructured ferritic alloys Cunningham, N. J.; Wu, Y.; Etienne, A. Journal of Nuclear Materials, Vol. 444, Issue 1-3 https://doi.org/10.1016/j.jnucmat.2013.09.013	journal	January 2014
Effect of Ti and W on the Mechanical Properties and Microstructure of 12% Cr Base Mechanical-alloyed Nano-sized ODS Ferritic Alloys Kim, Ick-Soo; Choi, Byung-Young; Kang, Chang-Yong ISIJ International, Vol. 43, Issue 10 https://doi.org/10.2355/isijinternational.43.1640	journal	January 2003
Recent Developments in Irradiation-Resistant Steels Odette, G. R.; Alinger, M. J.; Wirth, B. D. Annual Review of Materials Research, Vol. 38, Issue 1, p. 471-503 https://doi.org/10.1146/annurev.matsci.38.060407.130315	journal	August 2008
Irradiation-tolerant nanostructured ferritic alloys: Transforming helium from a liability to an asset Odette, G. R.; Hoelzer, D. T. JOM, Vol. 62, Issue 9 https://doi.org/10.1007/s11837-010-0144-1	journal	September 2010
Tensile and fracture toughness properties of MA957: implications to the development of nanocomposited ferritic alloys Alinger, M. J.; Odette, G. R.; Lucas, G. E. Journal of Nuclear Materials, Vol. 307-311 https://doi.org/10.1016/S0022-3115(02)01220-5	journal	December 2002
Characterization and comparative analysis of the tensile properties of five tempered martensitic steels and an oxide dispersion strengthened ferritic alloy irradiated at ≈295 °C to ≈6.5 dpa Maloy, S. A.; Saleh, T. A.; Anderoglu, O. Journal of Nuclear Materials, Vol. 468 https://doi.org/10.1016/j.jnucmat.2015.07.039	journal	January 2016
Mechanical properties of neutron irradiated nanostructured ferritic alloy 14YWT McClintock, D. A.; Hoelzer, D. T.; Sokolov, M. A. Journal of Nuclear Materials, Vol. 386-388 https://doi.org/10.1016/j.jnucmat.2008.12.104	journal	April 2009
Fracture behavior of 9Cr nanostructured ferritic alloy with improved fracture toughness Byun, Thak Sang; Yoon, Ji Hyun; Wee, Sung Hun Journal of Nuclear Materials, Vol. 449, Issue 1-3 https://doi.org/10.1016/j.jnucmat.2014.03.007	journal	June 2014
Influence of particle dispersions on the high-temperature strength of ferritic alloys Hoelzer, D. T.; Bentley, J.; Sokolov, M. A. Journal of Nuclear Materials, Vol. 367-370, p. 166-172 https://doi.org/10.1016/j.jnucmat.2007.03.151	journal	August 2007
On the role of alloy composition and processing parameters in nanocluster formation and dispersion strengthening in nanostuctured ferritic alloys Alinger, M. J.; Odette, G. R.; Hoelzer, D. T. Acta Materialia, Vol. 57, Issue 2 https://doi.org/10.1016/j.actamat.2008.09.025	journal	January 2009
High-temperature oxidation behavior of nano-structured ferritic oxide dispersion-strengthened alloys Kim, Jeoung Han; Kim, Kyong Min; Byun, Thak Sang Thermochimica Acta, Vol. 579 https://doi.org/10.1016/j.tca.2014.01.010	journal	March 2014
Effects of consolidation temperature, strength and microstructure on fracture toughness of nanostructured ferritic alloys Miao, P.; Odette, G. R.; Yamamoto, T. Journal of Nuclear Materials, Vol. 367-370 https://doi.org/10.1016/j.jnucmat.2007.03.144	journal	August 2007
Characteristic results and prospects of the 13Cr–1W–0.3Ti–0.3Y2O3 ODS steel Eiselt, Ch. Ch.; Klimenkov, M.; Lindau, R. Journal of Nuclear Materials, Vol. 386-388 https://doi.org/10.1016/j.jnucmat.2008.12.167	journal	April 2009
On the fracture toughness of irradiated F82H: Effects of loss of constraint and strain hardening capacity Yamamoto, T.; Odette, G. R.; Sokolov, M. A. Journal of Nuclear Materials, Vol. 417, Issue 1-3 https://doi.org/10.1016/j.jnucmat.2010.12.102	journal	October 2011
Oxide dispersion-strengthened steels: A comparison of some commercial and experimental alloys Klueh, R. L.; Shingledecker, J. P.; Swindeman, R. W. Journal of Nuclear Materials, Vol. 341, Issue 2-3 https://doi.org/10.1016/j.jnucmat.2005.01.017	journal	May 2005
Temperature dependence of strengthening mechanisms in the nanostructured ferritic alloy 14YWT: Part I—Mechanical and microstructural observations Kim, Jeoung Han; Byun, Thak Sang; Hoelzer, David T. Materials Science and Engineering: A, Vol. 559 https://doi.org/10.1016/j.msea.2012.08.042	journal	January 2013
Temperature dependence of strengthening mechanisms in the nanostructured ferritic alloy 14YWT: Part II—Mechanistic models and predictions Kim, Jeoung Han; Byun, Thak Sang; Hoelzer, David T. Materials Science and Engineering: A, Vol. 559 https://doi.org/10.1016/j.msea.2012.08.041	journal	January 2013
Tensile properties and deformation mechanisms of a 14Cr ODS ferritic steel Steckmeyer, A.; Praud, M.; Fournier, B. Journal of Nuclear Materials, Vol. 405, Issue 2 https://doi.org/10.1016/j.jnucmat.2010.07.027	journal	October 2010
Diffusional relaxation of the dislocation-inclusion repulsion Srolovitz, D. J.; Petkovic-luton, R. A.; Litton, M. J. Philosophical Magazine A, Vol. 48, Issue 5 https://doi.org/10.1080/01418618308236545	journal	May 1983
Characterization of High Temperature Creep Properties in Recrystallized 12Cr-ODS Ferritic Steel Claddings Ukai, Shigeharu; Okuda, Takanari; Fujiwara, Masayuki Journal of Nuclear Science and Technology, Vol. 39, Issue 8 https://doi.org/10.1080/18811248.2002.9715271	journal	August 2002
Tensile and Charpy impact properties of an ODS ferritic/martensitic steel 9Cr–1.8W–0.5Ti–0.35Y2O3 Zhang, Guangming; Zhou, Zhangjian; Wang, Man Fusion Engineering and Design, Vol. 89, Issue 4 https://doi.org/10.1016/j.fusengdes.2014.01.067	journal	April 2014

Cited By (1)

Effects of yttrium on microstructure and properties of reduced activation ferritic-martensitic steel Qiu, Guoxing; Zhan, Dongping; Li, Changsheng Materials Science and Technology, Vol. 34, Issue 16 https://doi.org/10.1080/02670836.2018.1509462	journal	August 2018

Similar Records

On Delamination Toughening of a 14YWT Nanostructured Ferritic Alloy

Journal Article · Thu Jun 22 00:00:00 EDT 2017 · Acta Materialia · OSTI ID:1330546

Alam, M.E.; Pal, S.; Maloy, Stuart Andrew; +1 more

Cold spray manufacturing of oxide-dispersion strengthened (ODS) steels using gas-atomized and ball-milled 14YWT powders

Journal Article · Mon Dec 05 00:00:00 EST 2022 · Journal of Nuclear Materials · OSTI ID:1330546

Yeom, Hwasung; Hoelzer, David; Maloy, Stuart; +1 more

Tensile fracture characteristics of nanostructured ferritic alloy 14YWT

Journal Article · Fri Jan 01 00:00:00 EST 2010 · Journal of Nuclear Materials · OSTI ID:1330546

Kim, Jeoung H; Byun, Thak Sang; Hoelzer, David T

Related Subjects

36 MATERIALS SCIENCE
nanostructured ferritic alloy
nano oxide
delamination
tensile properties
fractography

Title: Tensile deformation and fracture properties of a 14YWT nanostructured ferritic alloy

Citation Formats

References (23)

Cited By (1)

Similar Records

Related Subjects