skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Unraveling cyclic deformation mechanisms of a rolled magnesium alloy using in situ neutron diffraction

Journal Article · · Acta Materialia
 [1];  [1];  [2]
  1. Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)
  2. Univ. of Tennessee, Knoxville, TN (United States)

In the current study, the deformation mechanisms of a rolled magnesium alloy were investigated under cyclic loading using real-time in situ neutron diffraction under a continuous-loading condition. The relationship between the macroscopic cyclic deformation behavior and the microscopic response at the grain level was established. The neutron diffraction results indicate that more and more grains are involved in the twinning and detwinning deformation process with the increase of fatigue cycles. The residual twins appear in the early fatigue life, which is responsible for the cyclic hardening behavior. The asymmetric shape of the hysteresis loop is attributed to the early exhaustion of the detwinning process during compression, which leads to the activation of dislocation slips and rapid strain-hardening. The critical resolved shear stress for the activation of tensile twinning closely depends on the residual strain developed during cyclic loading. In the cycle before the sample fractured, the dislocation slips became active in tension, although the sample was not fully twinned. The increased dislocation density leads to the rise of the stress concentration at weak spots, which is believed to be the main reason for the fatigue failure. Furthermore, the deformation history greatly influences the deformation mechanisms of hexagonal-close-packed-structured magnesium alloy during cyclic loading.

Research Organization:
Oak Ridge National Laboratory (ORNL), Oak Ridge, TN (United States)
Sponsoring Organization:
USDOE Laboratory Directed Research and Development (LDRD) Program; USDOE Office of Science (SC), Basic Energy Sciences (BES); USDOE Office of Fossil Energy and Carbon Management (FECM)
Grant/Contract Number:
AC05-00OR22725; FE-0008855; FE-001194
OSTI ID:
1185511
Alternate ID(s):
OSTI ID: 1259928
Journal Information:
Acta Materialia, Vol. 85; ISSN 1359-6454
Publisher:
ElsevierCopyright Statement
Country of Publication:
United States
Language:
English
Citation Metrics:
Cited by: 39 works
Citation information provided by
Web of Science

References (58)

Magnesium alloys and applications journal January 1994
Magnesium journal April 2001
Preface to the viewpoint set on: The current state of magnesium alloy science and technology journal October 2010
Fatigue of Magnesium Alloys journal May 2004
Inverse surface macro-segregation in high-pressure die-cast AM60 magnesium alloy and its effects on fatigue behavior journal May 2005
Low cycle fatigue properties of an extruded AZ31 magnesium alloy journal April 2009
Low-cycle fatigue characteristics of rolled Mg–3Al–1Zn alloy journal November 2010
Strain-Controlled Low-Cycle Fatigue Properties of a Newly Developed Extruded Magnesium Alloy journal October 2008
Crack initiation mechanism of extruded AZ31 magnesium alloy in the very high cycle fatigue regime journal September 2008
Plastic anisotropy and the role of non-basal slip in magnesium alloy AZ31B journal June 2005
Internal strain and texture evolution during deformation twinning in magnesium journal June 2005
Hardening evolution of AZ31B Mg sheet journal January 2007
Application of texture simulation to understanding mechanical behavior of Mg and solid solution alloys containing Li or Y journal December 2001
Twinning and the ductility of magnesium alloys journal August 2007
Study of slip mechanisms in a magnesium alloy by neutron diffraction and modeling journal April 2003
Twinning–detwinning behavior during the strain-controlled low-cycle fatigue testing of a wrought magnesium alloy, ZK60A journal February 2008
Internal stress relaxation and load redistribution during the twinning–detwinning-dominated cyclic deformation of a wrought magnesium alloy, ZK60A journal August 2008
The role of twinning and untwinning in yielding behavior in hot-extruded Mg–Al–Zn alloy journal February 2007
Deformation dynamics study of a wrought magnesium alloy by real-time in situ neutron diffraction journal September 2013
Modeling the effect of twinning and detwinning during strain-path changes of magnesium alloy AZ31 journal May 2009
Low-Cycle Fatigue Behavior of an As-Extruded AM50 Magnesium Alloy journal May 2007
Effect of strain amplitude on tension–compression fatigue behavior of extruded Mg6Al1ZnA magnesium alloy journal May 2010
Study on cyclic deformation behavior of extruded Mg–3Al–1Zn alloy journal March 2012
Effects of hysteresis energy and mean stress on low-cycle fatigue behaviors of an extruded magnesium alloy journal June 2011
An experimental study of cyclic deformation of extruded AZ61A magnesium alloy journal May 2011
Effect of strain ratio on cyclic deformation and fatigue of extruded AZ61A magnesium alloy journal November 2012
Effect of strain ratio and strain rate on low cycle fatigue behavior of AZ31 wrought magnesium alloy journal August 2009
Microstructure and deformation mechanism of Mg6Al1ZnA alloy experienced tension–compression cyclic loading journal February 2011
Cyclic behavior of extruded magnesium: Experimental, microstructural and numerical approach journal December 2011
Relationship between Fatigue Strength and Grain Size in AZ31 Magnesium Alloys journal January 2008
Grain refinement and fatigue strengthening mechanisms in as-extruded Mg–6Zn–0.5Zr and Mg–10Gd–3Y–0.5Zr magnesium alloys by shot peening journal October 2013
Low-cycle Fatigue Behaviors of an As-extruded Mg–12%Gd–3%Y–0.5%Zr Alloy journal August 2013
Low cycle fatigue of a rare-earth containing extruded magnesium alloy journal July 2013
Effect of aging treatment on low-cycle fatigue behavior of extruded Mg–8Al–0.5Zn alloys journal October 2012
Effects of humidity and temperature on the fatigue behaviour of an extruded AZ61 magnesium alloy journal February 2005
Corrosion fatigue behavior of extruded magnesium alloy AZ61 under three different corrosive environments journal October 2008
The effects of texture and extension twinning on the low-cycle fatigue behavior of a rolled magnesium alloy, AZ31B journal October 2010
Effect of anisotropy on the low-cycle fatigue behavior of rolled AZ31 magnesium alloy journal January 2010
Fatigue properties of rolled magnesium alloy (AZ31) sheet: Influence of specimen orientation journal May 2011
Investigation of fatigue anisotropy in an extruded magnesium alloy journal June 2013
Crystal plasticity-based forming limit prediction for non-cubic metals: Application to Mg alloy AZ31B journal March 2009
3-D simulation of spatial stress distribution in an AZ31 Mg alloy sheet under in-plane compression journal October 2011
A crystal plasticity model for hexagonal close packed (HCP) crystals including twinning and de-twinning mechanisms journal October 2013
Modeling inelastic behavior of magnesium alloys during cyclic loading–unloading journal August 2013
On the Swift effect and twinning in a rolled magnesium alloy under free-end torsion journal August 2013
Strain controlled cyclic deformation behavior of an extruded magnesium alloy journal November 2008
An experimental study on cyclic deformation and fatigue of extruded ZK60 magnesium alloy journal March 2012
Cyclic deformation behavior of as-extruded Mg–3%Al–1%Zn journal May 2008
The Nanostructured Origin of Deformation Twinning journal January 2012
Deformation behavior of solid-solution-strengthened Mg–9 wt.% Al alloy: In situ neutron diffraction and elastic–viscoplastic self-consistent modeling journal July 2014
Investigation of deformation dynamics in a wrought magnesium alloy journal November 2014
Twinning–detwinning behavior during fatigue-crack propagation in a wrought magnesium alloy AZ31B journal October 2012
VULCAN—The engineering diffractometer at the SNS journal November 2006
First In Situ Lattice Strains Measurements Under Load at VULCAN journal October 2010
Unraveling structural evolution of LiNi0.5Mn1.5O4 by in situ neutron diffraction journal January 2013
In-situ observation of inhomogeneous degradation in large format Li-ion cells by neutron diffraction journal August 2013
Revealing the cyclic hardening mechanism of an austenitic stainless steel by real-time in situ neutron diffraction journal October 2014
Study of the mechanical properties of Mg-7.7at.% Al by in-situ neutron diffraction journal July 1999

Cited By (6)

Bending Behavior of a Wrought Magnesium Alloy Investigated by the In Situ Pinhole Neutron Diffraction Method journal August 2018
Tracing Phase Transformation and Lattice Evolution in a TRIP Sheet Steel under High-Temperature Annealing by Real-Time In Situ Neutron Diffraction journal September 2018
A suite-level review of the neutron powder diffraction instruments at Oak Ridge National Laboratory journal September 2018
Event-based processing of neutron scattering data at the Spallation Neutron Source journal May 2018
Characterization of Crystallographic Structures Using Bragg-Edge Neutron Imaging at the Spallation Neutron Source journal December 2017
Atomistic Simulation on the Twin Boundary Migration in Mg under Shear Deformation journal September 2019

Similar Records

Understanding Low-cycle Fatigue Life Improvement Mechanisms in a Pre-twinned Magnesium Alloy
Journal Article · Sat Oct 03 00:00:00 EDT 2015 · Journal of Alloys and Compounds · OSTI ID:1185511

In situ monitoring of dislocation, twinning, and detwinning modes in an extruded magnesium alloy under cyclic loading conditions
Journal Article · Mon Feb 01 00:00:00 EST 2021 · Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing · OSTI ID:1185511

Role of deformation twinning in fatigue of CrCoNi medium-entropy alloy at room temperature
Journal Article · Mon May 24 00:00:00 EDT 2021 · Scripta Materialia · OSTI ID:1185511