Corrosion resistance of stainless steels during thermal cycling in alkali nitrate molten salts.
The corrosion behavior of three austenitic stainless steels was evaluated during thermal cycling in molten salt mixtures consisting of NaNO{sub 3} and KNO{sub 3}. Corrosion tests were conducted with Types 316, 316L and 304 stainless steels for more than 4000 hours and 500 thermal cycles at a maximum temperature of 565 C. Corrosion rates were determined by chemically descaling coupons. Metal losses ranged from 5 to 16 microns and thermal cycling resulted in moderately higher corrosion rates compared to isothermal conditions. Type 316 SS was somewhat more corrosion resistant than Type 304 SS in these tests. The effect of carbon content on corrosion resistance was small, as 316L SS corroded only slightly slower than 316 SS. The corrosion rates increased as the dissolved chloride content of the molten salt mixtures increased. Chloride concentrations approximating 1 wt.%, coupled with thermal cycling, resulted in linear weight loss kinetics, rather than parabolic kinetics, which described corrosion rates for all other conditions. Optical microscopy and electron microprobe analysis revealed that the corrosion products consisted of iron-chromium spinel, magnetite, and sodium ferrite, organized as separate layers. Microanalysis of the elemental composition of the corrosion products further demonstrated that the chromium content of the iron-chromium spinel layer was relatively high for conditions in which parabolic kinetics were observed. However, linear kinetics were observed when the spinel layer contained relatively little chromium.
- Research Organization:
- Sandia National Laboratories (SNL), Albuquerque, NM, and Livermore, CA (United States)
- Sponsoring Organization:
- USDOE
- DOE Contract Number:
- AC04-94AL85000
- OSTI ID:
- 1020472
- Report Number(s):
- SAND2001-8518; TRN: US201116%%770
- Country of Publication:
- United States
- Language:
- English
Similar Records
Low Temperature Surface Carburization of Stainless Steels
Alloy compatibility with LiF--BeF₂ salts containing ThF₄ and UF₄
Related Subjects
CARBON
CHLORIDES
CHROMIUM
CORROSION
CORROSION PRODUCTS
CORROSION RESISTANCE
DESCALING
ELECTRON MICROPROBE ANALYSIS
FERRITE
KINETICS
MAGNETITE
MICROANALYSIS
MIXTURES
MOLTEN SALTS
NITRATES
OPTICAL MICROSCOPY
SODIUM
SPINELS
STAINLESS STEELS
THERMAL CYCLING
Steel
Stainless.
Corrosion resistant materials.
CSP
Concentrating Solar Power