skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Phase detonated shock tube (PFST)

Conference ·
DOI:https://doi.org/10.1063/1.46363· OSTI ID:10170016

The simple, cylindrically imploding and axially driven fast shock tube (FST) has been a basic component in the high velocity penetrator (HVP) program. It is a powerful device capable of delivering a directed and very high pressure output that has been successfully employed to drive hypervelocity projectiles. The FST is configured from a hollow, high-explosive (HE) cylinder, a low-density Styrofoam core, and a one-point initiator at one end. A Mach stem is formed in the core as the forward-propagating, HE detonation wave intersects the reflected radial wave. This simple FST has been found to be a powerful pressure multiplier. Up to 1-Mbar output pressure can be obtained from this device. Further increase in the output pressure can be achieved by increasing the HE detonation velocity. The FST has been fine tuned to drive a thin plate to very high velocity under an impulse per unit area of about 1 Mbar{mu}s/cm{sup 2}. A 1.5-mm-thick stainless steel disk has been accelerated intact to 0.8 cm/{mu}s under a loading pressure rate of several Mbar/{mu}s. By making the plate curvature slightly convex at the loading side the authors have successfully accelerated it to almost 1.0 cm/{mu}s. The incorporation of a barrel at the end of the FST has been found to be important as confinement of the propellant gas by the barrel tends to accelerate the projectile to higher velocity. The desire to accelerate the plate above 1.0 cm/{mu}s provided the impetus to develop a more advanced fast shock tube to deliver a much higher output pressure. This report describes the investigation of a relatively simple air-lens phase-detonation system (PFST) with fifty percent higher phase-detonation velocity and a modest 2 Mbar output. Code calculations have shown that this PFST acceleration of a plate to about 1.2 cm/{mu}s can be achieved. The performance of these PFSTs has been evaluated and the details are discussed.

Research Organization:
Los Alamos National Laboratory (LANL), Los Alamos, NM (United States)
Sponsoring Organization:
USDOE, Washington, DC (United States)
DOE Contract Number:
W-7405-ENG-36
OSTI ID:
10170016
Report Number(s):
LA-UR-93-2391; CONF-9306167-11; ON: DE93016523; TRN: 93:002162
Resource Relation:
Journal Volume: 309; Conference: 14. international conference on high pressure science and technology and 1993 technical meeting of the topical group on shock compression of condensed matter,Colorado Springs, CO (United States),28 Jun - 3 Jul 1993; Other Information: PBD: 1993
Country of Publication:
United States
Language:
English

Similar Records

Phase detonated shock tube (PFST)
Conference · Fri Jan 01 00:00:00 EST 1993 · OSTI ID:10170016

Hypervelocity plate acceleration
Conference · Tue Jan 01 00:00:00 EST 1991 · OSTI ID:10170016

Phase detonated shock tube (PFST)
Conference · Sun Jul 10 00:00:00 EDT 1994 · AIP Conference Proceedings (American Institute of Physics); (United States) · OSTI ID:10170016