Effects of nonstandard heat treatment temperatures on tensile and Charpy impact properties of carbon-steel casting repair welds
- Oak Ridge National Lab., TN (United States)
This report discusses carbon steel castings which are used for a number of different components in nuclear power plants, including valve bodies and bonnets. Components are often repaired by welding processes, and both welded components and the repair welds are subjected to a variety of postweld heat treatments (PWHT) with temperatures as high as 899{degrees}C (1650{degrees}F), well above the normal 593 to 677{degrees}C (1100 to 1250{degrees}F) temperature range. The temperatures noted are above the A1 transformation temperature for the materials used for these components. A test program was conducted to investigate the potential effects of such ``nonstandard`` PWHTs on mechanical properties of carbon steel casting welds. Four weldments were fabricated, two each with the shielded-metal-arc (SMA) and flux-cored-arc (FCA) processes,with a high-carbon and low-carbon filler metal in each case. All four welds were sectioned and given simulated PWHTs at temperatures from 621 to 899{degrees}C (1150 to 1650{degrees}F) in increments of 56{degrees}C (100{degrees}F) and for times of 5, 10, 20, and 40 h at each temperature. Hardness, tensile, and Charpy V-notch (CVN) impact tests were conducted for the as-welded and heat-treated conditions.
- Research Organization:
- US Nuclear Regulatory Commission (NRC), Washington, DC (United States). Div. of Engineering; Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)
- Sponsoring Organization:
- Nuclear Regulatory Commission, Washington, DC (United States)
- DOE Contract Number:
- AC05-84OR21400
- OSTI ID:
- 10144288
- Report Number(s):
- NUREG/CR-5972; ORNL/TM-12280; ON: TI93011942
- Resource Relation:
- Other Information: PBD: Apr 1993
- Country of Publication:
- United States
- Language:
- English
Similar Records
Weld repair of carbon-moly coke drums without postweld heat treatment
Transition of creep damage region in dissimilar welds between Inconel 740H Ni-based superalloy and P92 ferritic/martensitic steel