September 2016 Most Viewed Documents for Power Generation And Distribution

  1. Electric power high-voltage transmission lines: Design options, cost, and electric and magnetic field levels
    Stoffel, J.B.; Pentecost, E.D.; Roman, R.D.; Traczyk, P.A. (1994)

    462

  2. Load flow analysis: Base cases, data, diagrams, and results
    Portante, E.C.; Kavicky, J.A.; VanKuiken, J.C.; Peerenboom, J.P. (1997)

    212

  3. ASPEN Plus Simulation of CO2 Recovery Process
    Charles W. White III (2003)

    173

  4. Electric power substation capital costs
    Dagle, J.E.; Brown, D.R. (1997)

    146

  5. Wet cooling towers: rule-of-thumb design and simulation
    Leeper, S.A. (1981)

    106

  6. Recovery of Water from Boiler Flue Gas Using Condensing Heat Exchangers
    Levy, Edward; Bilirgen, Harun; DuPont, John (2011)

    85

  7. Study to determine the basic insulation level requirements for a prototype 1200 kV CGIT cable system
    Cooper, J. H. (1979)

    83

  8. Feed-pump hydraulic performance and design improvement, Phase I: research program design. Final report
    Brown, W.H.; Gopalakrishnan, S.; Fehlau, R.; Thompson, W.E.; Wilson, D.G. (1982)

    74

  9. Controlled low strength materials (CLSM), reported by ACI Committee 229
    Rajendran, N. (1997)

    70

  10. Load Modeling and State Estimation Methods for Power Distribution Systems: Final Report
    Tom McDermott (2010)

    69

  11. Seventh Edition Fuel Cell Handbook
    NETL (2004)

    64

  12. Wireless Sensor Network for Electric Transmission Line Monitoring
    Alphenaar, Bruce (2009)

    53

  13. Non-contact current and voltage sensing method using a clamshell housing and a ferrite cylinder
    Carpenter, Gary D.; El-Essawy, Wael; Ferreira, Alexandre Peixoto; Keller, Thomas Walter; Rubio, Juan C.; Schappert, Michael (2016)

    47

  14. Electrical and mechanical design criteria for EHV and UHV: overhead transmission lines
    Not Available (1980)

    46

  15. Non-contact current and voltage sensor having detachable housing incorporating multiple ferrite cylinder portions
    Carpenter, Gary D.; El-Essawy, Wael; Ferreira, Alexandre Peixoto; Keller, Thomas Walter; Rubio, Juan C.; Schappert, Michael A. (2016)

    45

  16. Test Program for High Efficiency Gas Turbine Exhaust Diffuser
    Norris, Thomas R. (2009)

    43

  17. Voltage control for a wind power plant based on the available reactive current of a DFIG and its impacts on the point of interconnection
    Usman, Yasir [Chonbuk National Univ., Jeonju (Korea, Republic of)]; Kim, Jinho [Chonbuk National Univ., Jeonju (Korea, Republic of)]; Muljadi, Eduard [National Renewable Energy Lab. (NREL), Golden, CO (United States)]; Kang, Yong Cheol [Chonbuk National Univ., Jeonju (Korea, Republic of)] (2016)

    41

  18. Process for forming a chromium diffusion portion and articles made therefrom
    Helmick, David Andrew; Cavanaugh, Dennis William; Feng, Ganjiang; Bucci, David Vincent (2015)

    40

  19. THE SCALE-UP OF LARGE PRESSURIZED FLUIDIZED BEDS FOR ADVANCED COAL-FIRED POWER PROCESSES
    Leon R. Glicksman; Michael Louge; Hesham F. Younis; Richard Tan; Mathew Hyre; Mark Torpey (2003)

    37

  20. Industrial Power Factor Analysis Guidebook.
    Electrotek Concepts. (1995)

    36

Last updated on Wednesday 12 October 2016