September 2016 Most Viewed Documents for Fission And Nuclear Technologies

  1. Estimation of gas leak rates through very small orifices and channels. [From sealed PuO/sub 2/ containers under accident conditions]
    Bomelburg, H.J. (1977)

    514

  2. Stress analysis and evaluation of a rectangular pressure vessel. [For equipment for sampling Hanford tank radwaste]
    Rezvani, M.A.; Ziada, H.H. (Westinghouse Hanford Co., Richland, WA (United States)); Shurrab, M.S. (Westinghouse Savannah River Co., Aiken, SC (United States)) (1992)

    243

  3. Concepts of Model Verification and Validation
    B.H.Thacker; S.W.Doebling; F.M.Hemez; M.C. Anderson; J.E. Pepin; E.A. Rodriguez (2004)

    219

  4. Forces in bolted joints: analysis methods and test results utilized for nuclear core applications (LWBR Development Program)
    Crescimanno, P.J.; Keller, K.L. (1981)

    211

  5. Porosity, permeability, and their relationship in granite, basalt, and tuff
    Not Available (1983)

    179

  6. System Definition and Analysis: Power Plant Design and Layout
    NONE (1996)

    155

  7. Handbook of human-reliability analysis with emphasis on nuclear power plant applications. Final report
    Swain, A D; Guttmann, H E (1983)

    129

  8. Wall thinning acceptance criteria for degraded carbon steel piping systems using FAD methodology
    Lam, P.S.; Gupta, N.K. (1995)

    111

  9. Thermophysical properties of sodium nitrate and sodium chloride solutions and their effects on fluid flow in unsaturated media
    Xu, Tianfu; Pruess, Karsten (2001)

    105

  10. Graphite design handbook
    Ho, F.H. (1988)

    102

  11. LWR nuclear fuel bundle data for use in fuel bundle handling
    Weihermiller, W.B.; Allison, G.S. (1979)

    101

  12. Evaluation of Modal Combination Methods for Seismic Response Spectrum Analysis
    Chokshi, N.; Kenneally, R.; Morante, R.; Norris, W.; Wang, Y. (1999)

    98

  13. Large-scale breeder reactor prototype mechanical pump conceptual design study, hot leg
    Not Available (1976)

    78

  14. LABORATORY STUDY FOR THE REDUCTION OF CHROME (VI) TO CHROME (III) USING SODIUM METABISULFITE UNDER ACIDIC CONDITIONS
    DUNCAM JB; GUTHRIE MD; LUECK KJ; AVILA M (2007)

    75

  15. Feed-pump hydraulic performance and design improvement, Phase I: research program design. Final report
    Brown, W.H.; Gopalakrishnan, S.; Fehlau, R.; Thompson, W.E.; Wilson, D.G. (1982)

    74

  16. Interim glycol flowsheet reduction/oxidation (redox) model for the Defense Waste Processing Facility (DWPF)
    Jantzen, C. M. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)]; Williams, M. S. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)]; Zamecnik, J. R. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)]; Missimer, D. M. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)] (2016)

    69

  17. Electrochemical oxidation of 243Am(III) in nitric acid by a terpyridyl-derivatized electrode
    Dares, C. J.; Lapides, A. M.; Mincher, B. J.; Meyer, T. J. (2015)

    68

  18. Erosion/corrosion-induced pipe wall thinning in US Nuclear Power Plants
    Wu, P.C. (1989)

    64

  19. Ultrasonic methods for measuring liquid viscosity and volume percent of solids
    Sheen, S.H.; Chien, H.T.; Raptis, A.C. (1997)

    63

  20. Mixed monofunctional extractants for trivalent actinide/lanthanide separations: TALSPEAK-MME
    Johnson, Aaron T. [Washington State Univ., Pullman, WA (United States)]; Nash, Kenneth L. [Washington State Univ., Pullman, WA (United States)] (2015)

    58

Last updated on Wednesday 12 October 2016