Physics of locked modes in ITER: Error field limits, rotation for obviation, and measurement of field errors
The existing theoretical and experimental basis for predicting the levels of resonant static error field at different components m,n that stop plasma rotation and produce a locked mode is reviewed. For ITER ohmic discharges, the slow rotation of the very large plasma is predicted to incur a locked mode (and subsequent disastrous large magnetic islands) at a simultaneous weighted error field ({Sigma}{sub 1}{sup 3}w{sub m1}B{sup 2}{sub rm1}){sup {1/2}}/B{sub T} {ge} 1.9 x 10{sup -5}. Here the weights w{sub m1} are empirically determined from measurements on DIII-D to be w{sub 11} = 0. 2, w{sub 21} = 1.0, and w{sub 31} = 0. 8 and point out the relative importance of different error field components. This could be greatly obviated by application of counter injected neutral beams (which adds fluid flow to the natural ohmic electron drift). The addition of 5 MW of 1 MeV beams at 45{degrees} injection would increase the error field limit by a factor of 5; 13 MW would produce a factor of 10 improvement. Co-injection beams would also be effective but not as much as counter-injection as the co direction opposes the intrinsic rotation while the counter direction adds to it. A means for measuring individual PF and TF coil total axisymmetric field error to less than 1 in 10,000 is described. This would allow alignment of coils to mm accuracy and with correction coils make possible the very low levels of error field needed.
- Research Organization:
- General Atomics, San Diego, CA (United States)
- Sponsoring Organization:
- USDOE Office of Energy Research, Washington, DC (United States)
- DOE Contract Number:
- AC03-89ER51114
- OSTI ID:
- 453747
- Report Number(s):
- GA-A22468; ON: DE97003754; TRN: 97:006780
- Resource Relation:
- Other Information: PBD: Feb 1997
- Country of Publication:
- United States
- Language:
- English
Similar Records
Limits on m = 2, n = 1 error field induced locked mode instability in TPX with typical sources of poloidal field coil error field and a prototype correction coil, ``C-coil``
Critical error fields for locked mode instability in tokamaks