Spall fracture in additive manufactured Ti-6Al-4V

Jones, David Robert; Fensin, Saryu Jindal; Dippo, Olivia; Beal, Roberta Ann; Livescu, Verpnica; Martinez, Daniel Tito; Trujillo, Carl Patrick; Florando, J. N.; Kumar, M.; Gray, III, George Thompson

doi:10.1063/1.4963279

Title: Spall fracture in additive manufactured Ti-6Al-4V

Journal Article · Tue Oct 04 00:00:00 EDT 2016 · Journal of Applied Physics

DOI:https://doi.org/10.1063/1.4963279· OSTI ID:1329904

Jones, David Robert ^[1]; Fensin, Saryu Jindal ^[1]; Dippo, Olivia ^[1]; Beal, Roberta Ann ^[1]; Livescu, Verpnica ^[1];

^[1]; Trujillo, Carl Patrick ^[1]; Florando, J. N. ^[2]; Kumar, M. ^[2];

^[1]

Los Alamos National Lab. (LANL), Los Alamos, NM (United States)
Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

View Accepted Manuscript (DOE)

View Accepted Manuscript (Publisher)

Cite

Export

Save

Research Organization:: Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

Sponsoring Organization:: USDOE National Nuclear Security Administration (NNSA)

Grant/Contract Number:: AC52-06NA25396; AC52-07NA27344

OSTI ID:: 1329904

Alternate ID(s):: OSTI ID: 1328489; OSTI ID: 1481089

Report Number(s):: LA-UR-16-22984; LLNL-JRNL-750765; JAPIAU

Journal Information:: Journal of Applied Physics, Vol. 120, Issue 13; ISSN 0021-8979

Publisher:: American Institute of Physics (AIP)Copyright Statement

Country of Publication:: United States

Language:: English

Citation Metrics:

Cited by: 27 works

Citation information provided by
Web of Science

References (27)

Effect of loading direction on grain boundary failure under shock loading Fensin, S. J.; Escobedo-Diaz, J. P.; Brandl, C. Acta Materialia, Vol. 64 https://doi.org/10.1016/j.actamat.2013.11.026	journal	February 2014
Accuracy and precision in photonic Doppler velocimetry Dolan, D. H. Review of Scientific Instruments, Vol. 81, Issue 5 https://doi.org/10.1063/1.3429257	journal	May 2010
A study of the microstructural evolution during selective laser melting of Ti–6Al–4V Thijs, Lore; Verhaeghe, Frederik; Craeghs, Tom Acta Materialia, Vol. 58, Issue 9 https://doi.org/10.1016/j.actamat.2010.02.004	journal	May 2010
Compact system for high-speed velocimetry using heterodyne techniques Strand, O. T.; Goosman, D. R.; Martinez, C. Review of Scientific Instruments, Vol. 77, Issue 8 https://doi.org/10.1063/1.2336749	journal	August 2006
As-Fabricated and Heat-Treated Microstructures of the Ti-6Al-4V Alloy Processed by Selective Laser Melting Vilaro, T.; Colin, C.; Bartout, J. D. Metallurgical and Materials Transactions A, Vol. 42, Issue 10 https://doi.org/10.1007/s11661-011-0731-y	journal	May 2011
Dynamic Mechanical Behavior of Additively Manufactured Ti6Al4V With Controlled Voids Fadida, Refael; Rittel, Daniel; Shirizly, Amnon Journal of Applied Mechanics, Vol. 82, Issue 4 https://doi.org/10.1115/1.4029745	journal	April 2015
Consolidation phenomena in laser and powder-bed based layered manufacturing Kruth, J. -P.; Levy, G.; Klocke, F. CIRP Annals, Vol. 56, Issue 2 https://doi.org/10.1016/j.cirp.2007.10.004	journal	January 2007
Spall fracture: methodological aspects, mechanisms and governing factors Kanel, G. I. International Journal of Fracture, Vol. 163, Issue 1-2 https://doi.org/10.1007/s10704-009-9438-0	journal	January 2010
Microstructure and mechanical behavior of Ti–6Al–4V produced by rapid-layer manufacturing, for biomedical applications Murr, L. E.; Quinones, S. A.; Gaytan, S. M. Journal of the Mechanical Behavior of Biomedical Materials, Vol. 2, Issue 1 https://doi.org/10.1016/j.jmbbm.2008.05.004	journal	January 2009
Microstructure and Mechanical Properties of Long Ti-6Al-4V Rods Additively Manufactured by Selective Electron Beam Melting Out of a Deep Powder Bed and the Effect of Subsequent Hot Isostatic Pressing Lu, S. L.; Tang, H. P.; Ning, Y. P. Metallurgical and Materials Transactions A, Vol. 46, Issue 9 https://doi.org/10.1007/s11661-015-2976-3	journal	May 2015
Hugoniot and shear strength of titanium 6-4 under shock loading Hopkins, A. Shock compression of condensed matter, AIP Conference Proceedings https://doi.org/10.1063/1.1303507	conference	January 2000
Effect of the build orientation on the mechanical properties and fracture modes of SLM Ti–6Al–4V Simonelli, M.; Tse, Y. Y.; Tuck, C. Materials Science and Engineering: A, Vol. 616 https://doi.org/10.1016/j.msea.2014.07.086	journal	October 2014
Role of geometry on properties of additively manufactured Ti-6Al-4V structures fabricated using laser based directed energy deposition Keist, Jayme S.; Palmer, Todd A. Materials & Design, Vol. 106 https://doi.org/10.1016/j.matdes.2016.05.045	journal	September 2016
Shock response of Ti-6Al-4V Dandekar, Dattatraya P. Shock compression of condensed matter, AIP Conference Proceedings https://doi.org/10.1063/1.1303508	conference	January 2000
Influence of grain boundary properties on spall strength: Grain boundary energy and excess volume Fensin, S. J.; Valone, S. M.; Cerreta, E. K. Journal of Applied Physics, Vol. 112, Issue 8 https://doi.org/10.1063/1.4761816	journal	October 2012
Spall studies on Ti6Al4V Me-Bar, Y.; Boas, M.; Rosenberg, Z. Materials Science and Engineering, Vol. 85 https://doi.org/10.1016/0025-5416(87)90469-1	journal	January 1987
Microstructure and tensile properties of selectively laser-melted and of HIPed laser-melted Ti–6Al–4V Qiu, Chunlei; Adkins, Nicholas J. E.; Attallah, Moataz M. Materials Science and Engineering: A, Vol. 578 https://doi.org/10.1016/j.msea.2013.04.099	journal	August 2013
Fatigue performance evaluation of selective laser melted Ti–6Al–4V Edwards, P.; Ramulu, M. Materials Science and Engineering: A, Vol. 598 https://doi.org/10.1016/j.msea.2014.01.041	journal	March 2014
Microstructure and mechanical properties of Ti–6Al–4V: Mill-annealed versus direct metal laser melted alloys Mulay, R. P.; Moore, J. A.; Florando, J. N. Materials Science and Engineering: A, Vol. 666 https://doi.org/10.1016/j.msea.2016.04.012	journal	June 2016
Response of high-purity titanium to high-pressure impulsive loading Razorenov, S. V.; Utkin, A. V.; Kanel, G. I. High Pressure Research, Vol. 13, Issue 6 https://doi.org/10.1080/08957959508202588	journal	September 1995
The shock and spall response of three industrially important hexagonal close-packed metals: magnesium, titanium and zirconium Hazell, P. J.; Appleby-Thomas, G. J.; Wielewski, E. Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, Vol. 372, Issue 2023 https://doi.org/10.1098/rsta.2013.0204	journal	August 2014
The role of anisotropy in the response of the titanium alloy Ti–6Al–4V to shock loading Millett, J. C. F.; Whiteman, G.; Bourne, N. K. Journal of Applied Physics, Vol. 104, Issue 7 https://doi.org/10.1063/1.2991164	journal	January 2008
Effects of grain size and boundary structure on the dynamic tensile response of copper Escobedo, J. P.; Dennis-Koller, D.; Cerreta, E. K. Journal of Applied Physics, Vol. 110, Issue 3 https://doi.org/10.1063/1.3607294	journal	August 2011
Shear stress and spall strength of materials under shock loads (review) Novikov, S. A. Journal of Applied Mechanics and Technical Physics, Vol. 22, Issue 3 https://doi.org/10.1007/BF00907567	journal	January 1981
A Review of Additive Manufacturing Wong, Kaufui V.; Hernandez, Aldo ISRN Mechanical Engineering, Vol. 2012 https://doi.org/10.5402/2012/208760	journal	January 2012
A comparison of the tensile, fatigue, and fracture behavior of Ti–6Al–4V and 15-5 PH stainless steel parts made by selective laser melting Rafi, H. Khalid; Starr, Thomas L.; Stucker, Brent E. The International Journal of Advanced Manufacturing Technology, Vol. 69, Issue 5-8 https://doi.org/10.1007/s00170-013-5106-7	journal	June 2013
Spallation in the Alloy Ti-6Al-4V Church, P. D. Shock Compression of Condensed Matter - 2001: 12th APS Topical Conference, AIP Conference Proceedings https://doi.org/10.1063/1.1483589	conference	January 2002

Cited By (2)

Effect of peak stress and tensile strain-rate on spall in tantalum Jones, D. R.; Fensin, S. J.; Martinez, D. T. Journal of Applied Physics, Vol. 124, Issue 8 https://doi.org/10.1063/1.5045045	journal	August 2018
Spall fracture in additive manufactured tantalum Jones, D. R.; Fensin, S. J.; Ndefru, B. G. Journal of Applied Physics, Vol. 124, Issue 22 https://doi.org/10.1063/1.5063930	journal	December 2018

Similar Records

Directional and oscillating residual stress on the mesoscale in additively manufactured Ti-6Al-4V Mesoscale and anisotropic residual stress in additive manufacturing of Ti-6Al-4V

Journal Article · Mon Apr 15 00:00:00 EDT 2019 · Acta Materialia · OSTI ID:1329904

Strantza, Maria; Vrancken, Bey; Prime, Michael Bruce; +5 more

Coupled experimental and computational study of residual stresses in additively manufactured Ti-6Al-4V components

Journal Article · Mon Jul 30 00:00:00 EDT 2018 · Materials Letters · OSTI ID:1329904

Strantza, Maria; Ganeriwala, Rishi K.; Clausen, Bjorn; +6 more

Effect of the scanning strategy on the formation of residual stresses in additively manufactured Ti-6Al-4V

Journal Article · Wed Sep 01 00:00:00 EDT 2021 · Additive Manufacturing · OSTI ID:1329904

Strantza, M.; Ganeriwala, R. K.; Clausen, Bjorn; +10 more

Related Subjects

36 MATERIALS SCIENCE
Materials science
Physics - Condensed matter physics

Title: Spall fracture in additive manufactured Ti-6Al-4V

Citation Formats

References (27)

Cited By (2)

Similar Records

Related Subjects