Simulation of Powder Layer Deposition in Additive Manufacturing Processes Using the Discrete Element Method
Abstract
This document serves as a final report to a small effort where several improvements were added to a LLNL code GEODYN-L to develop Discrete Element Method (DEM) algorithms coupled to Lagrangian Finite Element (FE) solvers to investigate powder-bed formation problems for additive manufacturing. The results from these simulations will be assessed for inclusion as the initial conditions for Direct Metal Laser Sintering (DMLS) simulations performed with ALE3D. The algorithms were written and performed on parallel computing platforms at LLNL. The total funding level was 3-4 weeks of an FTE split amongst two staff scientists and one post-doc. The DEM simulations emulated, as much as was feasible, the physical process of depositing a new layer of powder over a bed of existing powder. The DEM simulations utilized truncated size distributions spanning realistic size ranges with a size distribution profile consistent with realistic sample set. A minimum simulation sample size on the order of 40-particles square by 10-particles deep was utilized in these scoping studies in order to evaluate the potential effects of size segregation variation with distance displaced in front of a screed blade. A reasonable method for evaluating the problem was developed and validated. Several simulations were performed to showmore »
- Authors:
-
- Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)
- Publication Date:
- Research Org.:
- Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)
- Sponsoring Org.:
- USDOE
- OSTI Identifier:
- 1239200
- Report Number(s):
- LLNL-TR-678550
- DOE Contract Number:
- AC52-07NA27344
- Resource Type:
- Technical Report
- Country of Publication:
- United States
- Language:
- English
- Subject:
- 36 MATERIALS SCIENCE; 42 ENGINEERING; 75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND SUPERFLUIDITY; 97 MATHEMATICS, COMPUTING, AND INFORMATION SCIENCE
Citation Formats
Herbold, E. B., Walton, O., and Homel, M. A. Simulation of Powder Layer Deposition in Additive Manufacturing Processes Using the Discrete Element Method. United States: N. p., 2015.
Web. doi:10.2172/1239200.
Herbold, E. B., Walton, O., & Homel, M. A. Simulation of Powder Layer Deposition in Additive Manufacturing Processes Using the Discrete Element Method. United States. https://doi.org/10.2172/1239200
Herbold, E. B., Walton, O., and Homel, M. A. 2015.
"Simulation of Powder Layer Deposition in Additive Manufacturing Processes Using the Discrete Element Method". United States. https://doi.org/10.2172/1239200. https://www.osti.gov/servlets/purl/1239200.
@article{osti_1239200,
title = {Simulation of Powder Layer Deposition in Additive Manufacturing Processes Using the Discrete Element Method},
author = {Herbold, E. B. and Walton, O. and Homel, M. A.},
abstractNote = {This document serves as a final report to a small effort where several improvements were added to a LLNL code GEODYN-L to develop Discrete Element Method (DEM) algorithms coupled to Lagrangian Finite Element (FE) solvers to investigate powder-bed formation problems for additive manufacturing. The results from these simulations will be assessed for inclusion as the initial conditions for Direct Metal Laser Sintering (DMLS) simulations performed with ALE3D. The algorithms were written and performed on parallel computing platforms at LLNL. The total funding level was 3-4 weeks of an FTE split amongst two staff scientists and one post-doc. The DEM simulations emulated, as much as was feasible, the physical process of depositing a new layer of powder over a bed of existing powder. The DEM simulations utilized truncated size distributions spanning realistic size ranges with a size distribution profile consistent with realistic sample set. A minimum simulation sample size on the order of 40-particles square by 10-particles deep was utilized in these scoping studies in order to evaluate the potential effects of size segregation variation with distance displaced in front of a screed blade. A reasonable method for evaluating the problem was developed and validated. Several simulations were performed to show the viability of the approach. Future investigations will focus on running various simulations investigating powder particle sizing and screen geometries.},
doi = {10.2172/1239200},
url = {https://www.osti.gov/biblio/1239200},
journal = {},
number = ,
volume = ,
place = {United States},
year = {Mon Oct 26 00:00:00 EDT 2015},
month = {Mon Oct 26 00:00:00 EDT 2015}
}