skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information
  1. Finite-size effects in the static structure factor S ( k ) and S ( 0 ) for a two-dimensional Yukawa liquid

    Finite-size effects in the static structure factor S(k) are analyzed for an amorphous substance. As the number of particles is reduced, S(0) increases greatly, up to an order of magnitude. Meanwhile, there is a decrease in the height of the first peak S peak. These finite-size effects are modeled accurately by the Binder formula for S(0) and our empirical formula for S peak. Procedures are suggested to correct for finite-size effects in S(k) data and in the hyperuniformity index H ≡ S(0)/S peak. These principles generally apply to S(k) obtained from particle positions in noncrystalline substances. As a result, themore » amorphous substance we simulate is a two-dimensional liquid, with a soft Yukawa interaction modeling a dusty plasma experiment.« less
  2. Synchronization of dust acoustic waves in a forced Korteweg–de Vries–Burgers model

    The synchronization of dust acoustic waves to an external periodic source is studied in the framework of a driven Korteweg–de Vries–Burgers equation that takes into account the appropriate nonlinear and dispersive nature of low-frequency waves in a dusty plasma medium. For a spatiotemporally varying source term, the system is shown to demonstrate harmonic (1:1) and superharmonic (1:2) synchronized states. Here, the existence domains of these states are delineated in the form of Arnold tongue diagrams in the parametric space of the forcing amplitude and forcing frequency and their resemblance to some past experimental results is discussed.
  3. Coulomb expansion of a thin dust cloud observed experimentally under afterglow plasma conditions

    The Coulomb expansion of a thin cloud of charged dust particles was observed experimentally, in a plasma afterglow. This expansion occurs due to mutual repulsion among positively charged dust particles, after electrons and ions have escaped the chamber volume. In the experiment, a two-dimensional cloud of dust particles was initially levitated in a glow-discharge plasma. The power was then switched off to produce afterglow conditions. The subsequent fall of the dust cloud was slowed by reversing the electric force, to an upward direction, allowing an extended observation. At early time, measurements of the Coulomb expansion in the horizontal direction aremore » found to be accurately modeled by the equation of state for a uniformly charged thin disk. Finally, bouncing from the lower electrode was found to be avoided by lowering the impact velocity <100 mm/s.« less
  4. Preservation of a Dust Crystal as it Falls in an Afterglow Plasma

    In an experiment, the power that sustains a plasma was extinguished, so that microspheres, which had been levitated, fell downward toward a lower electrode. At the beginning of their fall, the microspheres were self-organized with a crystalline structure. This structure was found to be preserved as the microspheres accelerated all the way to the lower electrode. Although microspheres had, in this afterglow plasma, large positive charges of 12,500 e, their interparticle repulsion was unable to significantly alter the crystalline arrangement of the microspheres, as they fell. After their impact on the lower electrode, the microspheres bounced upward, and only thenmore » was the crystalline structure lost.« less
  5. Frequency-dependent complex viscosity obtained for a liquid two-dimensional dusty plasma experiment

    Strongly coupled plasmas in a liquid phase can be characterized by a complex viscosity η(ω), which is a function of frequency. Data from a single experiment with dusty plasma were analyzed to compare η(ω) obtained by two fundamentally distinct methods. In a nonequilibrium method, a pair of counterpropagating laser beams, separated by a gap, applied a sinusoidal shear to a two-dimensional liquid, and η(ω) was determined using the constitutive relation. In an equilibrium method, there was no externally applied shear, so η(ω) could be calculated with a generalized Green-Kubo relation. The results for these two methods are compared for themore » real and imaginary parts of η(ω). For both parts, it is confirmed that the two methods yield results that agree qualitatively in their trends with frequency, with the real part diminishing with ω and the imaginary part increasing with ω, as expected for viscoelastic liquids. Quantitatively, the values of η(ω) obtained by the two methods differ slightly. For the experiment that we analyze, values for the real and imaginary parts of η(ω) are substantially greater than those reported in an earlier experiment, which we attribute to shear thinning effects in the earlier experiment. As a result, the experiment we analyze was designed to minimize shear thinning, unlike the earlier experiment.« less
  6. Experiment and model for a Stokes layer in a strongly coupled dusty plasma

    A Stokes layer, which is a flow pattern that arises in a viscous fluid adjacent to an oscillatory boundary, was observed in an experiment using a two-dimensional strongly coupled dusty plasma. Liquid conditions were maintained using laser heating, while a separate laser manipulation applied an oscillatory shear that was localized and sinusoidal. The evolution of the resulting flow was analyzed using space-time diagrams. These figures provide an intuitive visualization of a Stokes layer, including features such as the depth of penetration and wavelength. Another feature, the characteristic speed for the penetration of the oscillatory flow, also appears prominently in space-timemore » diagrams. To model the experiment, the Maxwell-fluid model of a Stokes layer was generalized to describe a two-phase liquid. In our experiment, the phases were gas and dust, where the dust cloud was viscoelastic due to strong Coulomb coupling. Furthermore, the model is found to agree with the experiment, in the appearance of the space-time diagrams, and in the values of the characteristic speed, depth of penetration, and wavelength.« less
  7. Positive charging of grains in an afterglow plasma is enhanced by ions drifting in an electric field

    In a plasma, the polarity of a dust grain's charge is typically negative, but it can reverse and become positive in an afterglow, when the power sustaining the plasma is switched off. This positive charging, which occurs in the afterglow's first few milliseconds, is studied for grains much larger than a few nm. It is hypothesized that the positive charging is enhanced by the presence of a dc electric field, which causes ions to drift through the neutral gas. A larger value of the reduced electric field E/N leads to a larger ion kinetic energy and thus a greater collectionmore » of positive charge on a grain. The maximum possible positive charge is attained if the grain's surface potential rises to match the ion kinetic energy, at a time before ions have departed and the grain's charge becomes frozen. Thereafter, when vacuum conditions prevail, the grain will retain its positive residual charge. In an experiment, dust grains were electrically levitated in a capacitively coupled plasma until the power was abruptly turned off. In the afterglow, grains fell faster than expected due to gravity alone, indicating a downward electric force, in the presence of a remaining dc electric field. Acceleration measurements yielded repeatable results for the residual charge's value, which was of the order +104 e and increased with E/N, supporting the hypothesis.« less
  8. Shocks propagate in a 2D dusty plasma with less attenuation than due to gas friction alone

    In a dusty plasma, an impulsively generated shock, i.e., blast wave, was observed to decay less than would be expected due to gas friction alone. In the experiment, a single layer of microparticles was levitated in a radio frequency glow-discharge plasma. In this layer, the microparticles were self-organized as a 2D solid-like strongly coupled plasma, which was perturbed by the piston-like mechanical movement of a wire. To excite a blast wave, the wire’s motion was abruptly stopped, so that the input of mechanical energy ceased at a known time. It was seen that, as it propagated across the layer, themore » blast wave’s amplitude persisted with little decay. This result extends similar findings, in previous experiments with 3D microparticle clouds, to the case of 2D clouds. In our cloud, out-of-plane displacements were observed, lending support to the possibility that an instability, driven by wakes in the ion flow, provides energy that sustains the blast wave’s amplitude despite the presence of gas damping« less
  9. A forced Korteweg–de Vries model for nonlinear mixing of oscillations in a dusty plasma

    Nonlinear mixing of oscillations in a dusty plasma due to the harmonic time varying modulation of a nonlinear compressional oscillation is analyzed using a simple mathematical model consisting of a forced Korteweg–de Vries equation. An exact analytical solution of this equation is found to exhibit nonlinear mixing in the system. The model solution can be usefully employed to predict the existence of nonlinear mixing of oscillations in a two-dimensional dusty plasma system of a particular experimental configuration.
  10. Experimental observation of cnoidal waveform of nonlinear dust acoustic waves

    The experimentally measured waveform of nonlinear dust acoustic waves in a plasma is shown to be accurately described by a cnoidal function. This function, which is predicted by nonlinear theory, has broad minima and narrow peaks. Fitting the experimental waveforms to the cnoidal function also provides a measure of the wave’s nonlinearity, namely, the elliptical parameter k. By characterizing experimental results at various wave amplitudes, we confirm that the parameter k increases and approaches a maximum value of unity, as the wave amplitude is increased. Here, the underlying theory that predicts the cnoidal waveform as an exact solution of amore » Korteweg-de Vries model equation takes account of the streaming ions that are responsible for the spontaneous excitation of the dust acoustic waves.« less
...

Search for:
All Records
Author / Contributor
0000000239880848

Refine by:
Resource Type
Availability
Publication Date
Author / Contributor
Research Organization