skip to main content

Title: Assessment of the KE Basin Sand Filter Inventory In Support of Hazard Categorization

In 1978, the water cleaning system for the KE Basin was upgraded by adding a sand filter and ion exchange columns. Basin water containing finely divided solids is collected by three surface skimmers and pumped to the sand filter. Filtrate from the sand filter is further treated in the ion exchange modules. The suspended solids accumulate in the sand until the pressure drop across the filter reaches established operating limits, at which time the sand filter is backwashed. The backwash is collected in the NLOP, where the solids are allowed to settle as sludge. Figure 2-1 shows a basic piping and instrumentation diagram depicting the relationship among the basin skimmers, sand filter, and NLOP. During the course of deactivation and decommissioning (D&D) of the K-Basins, the sand filter and its media will need to be dispositioned. The isotopic distribution of the sludge in the sand filter has been estimated in KE Basin Sand Filter Monolith DQO (KBC-24705). This document estimates the sand filter contribution to the KE hazard categorization using the data from the DQO.
Authors:
;
Publication Date:
OSTI Identifier:
971117
Report Number(s):
PNNL-15403
830403000; TRN: US201003%%795
DOE Contract Number:
AC05-76RL01830
Resource Type:
Technical Report
Research Org:
Pacific Northwest National Laboratory (PNNL), Richland, WA (US)
Sponsoring Org:
USDOE
Country of Publication:
United States
Language:
English
Subject:
02 PETROLEUM; CLEANING; DEACTIVATION; DECOMMISSIONING; DISTRIBUTION; ION EXCHANGE; PRESSURE DROP; SAND; SKIMMERS; SLUDGES; WATER KE Basin; sand filter; hazard categorization