Elevated Temperature Strength of Fine-Grained INCONEL Alloy MA754

Journal Article · Thu Sep 01 00:00:00 EDT 2005 · Metallurgical and Materials Transactions A

DOI:https://doi.org/10.1007/s11661-005-0130-3· OSTI ID:912399

Totemeier, T C; Lillo, T M; Simpson, J A

Elevated temperature tensile and creep-rupture tests were performed on INCONEL alloy MA754 in an as-rolled, fine-grained condition. Tensile tests were performed at 25, 800, 900, and 1000°C; creep-rupture tests were performed at 800, 900, and 1000°C. The elevated temperature strength in the fine-grained condition was approximately 25% of the standard, coarse-grained annealed condition. While good ductility was observed in tensile tests at a nominal strain rate of 1×10-3 sec-1, ductility in creep-rupture tests was very low, with failure elongations less than 5% and no reduction in area. Creep deformation appeared to occur solely by cavity formation and growth.

• Research Organization: Idaho National Lab. (INL), Idaho Falls, ID (United States)
• Sponsoring Organization: DOE - NE
• DOE Contract Number: DE-AC07-99ID-13727
• OSTI ID: 912399
• Report Number(s): INEEL/JOU-04-02565; TRN: US200801%%832
• Journal Information: Metallurgical and Materials Transactions A, Vol. 36A, Issue 9; ISSN 1073-5623
• Country of Publication: United States
• Language: English

Related Subjects

36 - MATERIALS SCIENCE
CREEP
DEFORMATION
DUCTILITY
INCONEL ALLOYS
STRAIN RATE
creep
grain size
Oxide-dispersioned alloy
tensile