skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Applications of intermittent cathodic protection for control of rebar corrosion

Conference ·
OSTI ID:898068

Rebar in concrete structures is susceptible to chloride-induced corrosion. Impressed current cathodic protection (ICCP) is frequently used to protect rebar against corrosion,. To take advantage of rebar passivity in concrete after ICCP is turned off, the Albany Research Center, in collaboration with the Oregon Department of Transportation and Pacific Northwest National Laboratory, is investigating applications of intermittent cathodic protection corrosion as a means for advancing corrosion control of reinforced concrete structures while extending the service life of thermal-sprayed zinc anodes. Corrosion rates of rebar in deaerated and oxygenated simulated pore water and quartz sand saturated with simulated pore water at pH 7 and 13 were determined using electrochemical and mass loss techniques. The rebar was passive at pH 13, but measurable corrosion occurred at pH 7. The use of sand prevented convective transport of reactants to and from the rebar, thereby substantially reducing the corrosion rate. In-situ Surface Enhanced Raman Spectroscopy (SERS) results indicated the presence of Fe304 and Fe (OH)2 on the rebar surface depending upon the polarization conditions. The amount of Fe304 decreased while Fe (OH)2 increased as the time of cathodic polarization increased.

Research Organization:
Albany Research Center (ARC), Albany, OR (United States)
Sponsoring Organization:
USDOE
OSTI ID:
898068
Report Number(s):
DOE/ARC-2002-013; TRN: US200705%%441
Resource Relation:
Conference: Corrosion 2002, Denver, CO, Apr. 7-11, 2002
Country of Publication:
United States
Language:
English