skip to main content

SciTech ConnectSciTech Connect

Title: BPM ANALOG FRONT-END ELECTRONICS BASED ON THE AD8307 LOG AMPLIFIER

Beam position monitor (BPM) signal-processing electronics utilizing the Analog Devices AD8307 logarithmic amplifier has been developed for the Low Energy Demonstration Accelerator (LEDA), part of the Accelerator Production of Tritium (APT) project at Los Alamos. The low-pass filtered 350 MHz fundamental signal from each of the four microstrip electrodes in a BPM is ''detected'' by an AD8307 log amp, amplified and scaled to accommodate the 0 to +5V input of an analog-to-digital (A/D) converter. The resultant four digitized signals represent a linear power relationship to the electrode signals, which are in turn related to beam current and position. As the AD8307 has a potential dynamic range of approximately 92 dB, much attention must be given to noise reduction, sources of which can be digital signals on the same board, power supplies, inter-channel coupling, stray RF and others. This paper will describe the operational experience of this particular analog front-end electronic circuit design.
Authors:
;
Publication Date:
OSTI Identifier:
769068
Report Number(s):
LA-UR-00-2356
TRN: US0104183
DOE Contract Number:
W-7405-ENG-36
Resource Type:
Conference
Resource Relation:
Conference: Conference title not supplied, Conference location not supplied, Conference dates not supplied; Other Information: PBD: 1 Jun 2000
Research Org:
Los Alamos National Lab., NM (US)
Sponsoring Org:
US Department of Energy (US)
Country of Publication:
United States
Language:
English
Subject:
43 PARTICLE ACCELERATORS; 07 ISOTOPES AND RADIATION SOURCES; ACCELERATORS; AMPLIFIERS; BEAM CURRENTS; BEAM POSITION; DESIGN; ELECTRONIC CIRCUITS; BEAM MONITORS; POWER SUPPLIES; HYDROGEN PRODUCTION; TRITIUM; SIGNAL CONDITIONING