skip to main content

Title: ACCURATE QUANTIFICATION OF DRIED RESIDUE THIN FILMS USING X-RAY FLUORESCENCE

An XRF specimen preparation method was developed to quantify the concentration of gallium in plutonium metal while minimizing the risk of contaminating the instrument with radioactive material. To ensure that homogeneous specimens are examined, plutonium is dissolved in dilute HCl and HNO{sub 3} prior to analysis. In the preliminary work here, non-radioactive aqueous gallium standards were prepared, and zinc was added as an internal standard to improve the accuracy and precision. Aliquots from these solutions were cast on Mylar XRF films and air dried prior to analysis. Two methods of casting the solutions were evaluated: (1) casting as a thin layer using a surfactant to wet the support film and (2) casting multiple small spots on the support film. Aqueous gallium standards were prepared and cast as dried residue specimens using each method. These specimens were then analyzed, and calibration curves were prepared. Highly linear calibrations were obtained for each preparation method when zinc was used as the internal standard (RMS values {le}1% of the standards concentration range in both cases). Based on this preliminary work, this dried residue process appears very promising for the accurate quantification of gallium in plutonium.
Authors:
;
Publication Date:
OSTI Identifier:
768772
Report Number(s):
LA-UR-00-4155
TRN: AH200123%%392
DOE Contract Number:
W-7405-ENG-36
Resource Type:
Conference
Resource Relation:
Conference: Conference title not supplied, Conference location not supplied, Conference dates not supplied; Other Information: PBD: 1 Sep 2000
Research Org:
Los Alamos National Lab., NM (US)
Sponsoring Org:
US Department of Energy (US)
Country of Publication:
United States
Language:
English
Subject:
36 MATERIALS SCIENCE; CALIBRATION; CASTING; FLUORESCENCE; GALLIUM; MYLAR; PLUTONIUM; RADIOACTIVE MATERIALS; RESIDUES; SURFACTANTS; THIN FILMS; ZINC