Screening of crude oils for asphalt precipitation: Theory, practice, and the selection of inhibitors
- Koninklijke Shell E and P Lab., Rijswijk (Netherlands)
This paper describes a simple method to screen crude oils for their tendency to precipitate asphalt, which may cause problems during production. The method is based on a thermodynamic model of asphalt solubility, derived earlier by Flory and Huggins. The most important parameters in this model are the Hildebrand solubility parameters for oil and asphaltene, and their molar volumes. The oil parameters can all be correlated with the in-situ density of the crude. It is shown that heavy crudes usually will give fewer problems with asphalt precipitation, despite their higher asphaltene content, certainly if the reservoir pressure is close to bubblepoint pressure. Consequently, the tendency for asphalt precipitation is mainly determined by three parameters: the extent to which the crude is undersaturated with gas, the density of the crude at reservoir conditions, and its saturation with asphalt at downhole conditions. Apart from the simple screening method, more elaborate methods are described to assess the potential for asphalt precipitation more accurately; asphaltene analysis on produced reservoir fluid and tank oil; n-heptane titration of the tank oil; visual inspection of a bottom-hole sample in a high-pressure cell during pressure reduction; and dynamic flow tests on tank oil after n-heptane addition.
- OSTI ID:
- 6628559
- Journal Information:
- SPE Production and Facilities (Society of Petroleum Engineers); (United States), Vol. 10:1; ISSN 1064-668X
- Country of Publication:
- United States
- Language:
- English
Similar Records
Study of asphalt/asphaltene precipitation during addition of solvents to West Sak crude
Asphalt flocculation and deposition. 1: The onset of precipitation