Tribological properties of polymer films and solid bodies in a vacuum environment
The tribological properties of ten different polymer based materials were evaluated in a vacuum environment to determine their suitability for possible lubrication applications in a space environment, such as might be encountered on the proposed space station. A pin-on-disk tribometer was used and the polymer materials were evaluated either as solid body disks or as films applied to 440C HT stainless steel disks. A 440C HT stainless steel hemispherically tipped pin was slid against the polymer materials. For comparison, similar tests were conducted in a controlled air atmosphere of 50 percent relative humidity air. In most instances, the polymer materials lubricated much better under vacuum conditions than in air. Thus, several of the materials show promise as lubricants for vacuum applications. Friction coefficients of 0.05 or less and polymer material wear rates of up to 2 orders of magnitude less than in air were obtained. One material showed considerable promise as a traction drive material. Relatively high friction coefficients (0.36 to 0.52) and reasonably low wear rates were obtained in vacuum.
- Research Organization:
- National Aeronautics and Space Administration, Cleveland, OH (USA). Lewis Research Center
- OSTI ID:
- 6580924
- Report Number(s):
- N-87-17906; NASA-TM-88966; E-3429; NAS-1.15:88966; CONF-870510-3
- Resource Relation:
- Conference: Annual meeting of the American Society of Lubrication Engineers, Anaheim, CA, USA, 11 May 1987
- Country of Publication:
- United States
- Language:
- English
Similar Records
The effect of prolonged exposure to 750{degree}C air on the tribological performance of PM212
Use of electron spectroscopies in the tribological evaluation of diamond films