Mine shaft conveyance load-monitoring system
- Bureau of Mines, Spokane, WA (United States)
- McCoy Engineering Co., Spokane, WA (United States)
Technology to enhance safety features for mine shafts and elevators is being investigated by researchers at the US Bureau of Mines. The objective of this research is to prevent injuries and fatalities related to hoist and elevator operations. Mine Safety and Health Administration statistics indicate that several factors contribute to hoisting accidents. A significant number of these factors are related to lack of adequate information on the position of the conveyance coupled with slack or overloaded rope resulting from obstructions or misalignments in the hoistway. Typically, this information is determined from sensors located in the hoist room. Subsequently, hoist and elevator control may be compromised and accidents result. This paper describes development of a slack rope sensor and data-transmission and collection hardware to sense conditions and acquire data directly from the hoisting conveyance. A new type of load cell senses wire rope tension at the conveyance. A new type of load cell senses wire rope tension at the conveyance. A multichannel signal processing board has been designed and fabricated and is undergoing both static testing to evaluate long-term stability and dynamic testing under simulated hoisting conditions. Analog signals from the sensors are sampled at 100-ms intervals. Data transmission between the moving conveyance and the hoistroom is accomplished via a 2,400-baud FM radio modem. Data are acquired at the conveyance or in the hoistroom through a serial communications port on a laptop computer. Software has been written to acquire, analyze, and process the data. The resulting system will allow operating personnel to determine conveyance load, and thus rope tension and slack or overload rope conditions, in relation to conveyance position in the hoistway.
- OSTI ID:
- 427900
- Report Number(s):
- CONF-9510203-; TRN: IM9708%%227
- Resource Relation:
- Conference: IEEE/Industrial Application Society conference, Orlando, FL (United States), 8-12 Oct 1995; Other Information: PBD: 1995; Related Information: Is Part Of Conference record of the 1995 IEEE Industry Applications Society 30. IAS annual meeting. Volume 3; PB: 961 p.
- Country of Publication:
- United States
- Language:
- English
Similar Records
Slack and overload rope protection system. Open file report, 28 Mar 79-15 Jan 83
Effects of wire rope in mitigating a waste-shaft accident