Selection of an acid-gas removal process for an LNG plant
- Exxon Production Research, Houston, TX (United States)
- Exxon Production Malaysia, Inc., Kuala Lumpur (Malaysia)
Acid gas contaminants, such as, CO{sub 2}, H{sub 2}S and mercaptans, must be removed to a very low level from a feed natural gas before it is liquefied. CO{sub 2} is typically removed to a level of about 100 ppm to prevent freezing during LNG processing. Sulfur compounds are removed to levels required by the eventual consumer of the gas. Acid-gas removal processes can be broadly classified as: solvent-based, adsorption, cryogenic or physical separation. The advantages and disadvantages of these processes will be discussed along with design and operating considerations. This paper will also discuss the important considerations affecting the choice of the best acid-gas removal process for LNG plants. Some of these considerations are: the remoteness of the LNG plant from the resource; the cost of the feed gas and the economics of minimizing capital expenditures; the ultimate disposition of the acid gas; potential for energy integration; and the composition, including LPG and conditions of the feed gas. The example of the selection of the acid-gas removal process for an LNG plant.
- OSTI ID:
- 418208
- Report Number(s):
- CONF-960348-; TRN: IM9705%%586
- Resource Relation:
- Conference: 75. Annual convention of the Gas Processors Association, Denver, CO (United States), 11-13 Mar 1996; Other Information: PBD: 1996; Related Information: Is Part Of Seventy-fifth Gas Processors Association annual convention: Proceedings; PB: 325 p.
- Country of Publication:
- United States
- Language:
- English
Similar Records
Gas pre-treatment and their impact on liquefaction processes
LANDFILL GAS CONVERSION TO LNG AND LCO{sub 2}. PHASE 1, FINAL REPORT FOR THE PERIOD MARCH 1998-FEBRUARY 1999