Calibration of frictional forces in atomic force microscopy
- Materials Sciences Division, Lawrence Berkeley National Laboratory, Berkeley, California 94720 (United States)
The atomic force microscope can provide information on the atomic-level frictional properties of surfaces, but reproducible quantitative measurements are difficult to obtain. Parameters that are either unknown or difficult to precisely measure include the normal and lateral cantilever force constants (particularly with microfabricated cantilevers), the tip height, the deflection sensor response, and the tip structure and composition at the tip-surface contact. We present an {ital in} {ital situ} experimental procedure to determine the response of a cantilever to lateral forces in terms of its normal force response. This procedure is quite general. It will work with any type of deflection sensor and does not require the knowledge or direct measurement of the lever dimensions or the tip height. In addition, the shape of the tip apex can be determined. We also discuss a number of specific issues related to force and friction measurements using optical lever deflection sensing. We present experimental results on the lateral force response of commercially available V-shaped cantilevers. Our results are consistent with estimates of lever mechanical properties using continuum elasticity theory. {copyright} {ital 1996 American Institute of Physics.}
- OSTI ID:
- 389518
- Journal Information:
- Review of Scientific Instruments, Vol. 67, Issue 9; Other Information: PBD: Sep 1996
- Country of Publication:
- United States
- Language:
- English
Similar Records
Lateral force calibration in atomic force microscopy: A new lateral force calibration method and general guidelines for optimization
Lateral force microscope calibration using a modified atomic force microscope cantilever