Minimising the effect of nanoparticle deformation in intermittent contact amplitude modulation atomic force microscopy measurements
- National Measurement Institute, 36 Bradfield Road, West Lindfield, New South Wales 2070 (Australia)
The results of systematic height measurements of polystyrene (PS) nanoparticles using intermittent contact amplitude modulation atomic force microscopy (IC-AM-AFM) are presented. The experimental findings demonstrate that PS nanoparticles deform during AFM imaging, as indicated by a reduction in the measured particle height. This deformation depends on the IC-AM-AFM imaging parameters, material composition, and dimensional properties of the nanoparticles. A model for nanoparticle deformation occurring during IC-AM-AFM imaging is developed as a function of the peak force which can be calculated for a particular set of experimental conditions. The undeformed nanoparticle height can be estimated from the model by extrapolation to zero peak force. A procedure is proposed to quantify and minimise nanoparticle deformation during IC-AM-AFM imaging, based on appropriate adjustments of the experimental control parameters.
- OSTI ID:
- 22596755
- Journal Information:
- Journal of Applied Physics, Vol. 119, Issue 21; Other Information: (c) 2016 Author(s); Country of input: International Atomic Energy Agency (IAEA); ISSN 0021-8979
- Country of Publication:
- United States
- Language:
- English
Similar Records
Current measurements in the intermittent-contact mode of atomic force microscopy using the Fourier method: a feasibility analysis
Wide range local resistance imaging on fragile materials by conducting probe atomic force microscopy in intermittent contact mode