skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: A button - type beam position monitor design for TARLA facility

Journal Article · · AIP Conference Proceedings
DOI:https://doi.org/10.1063/1.4944200· OSTI ID:22590990
;  [1];  [2]
  1. Dept. of Eng. of Physics, Ankara University, Ankara (Turkey)
  2. Institute of Accelerator Technologies, Ankara University, Ankara (Turkey)

Turkish Accelerator and Radiation Laboratory in Ankara (TARLA) facility is proposed as an IR FEL and Bremsstrahlung facility as the first facility of Turkish Accelerator Center (TAC). TARLA is essentially proposed to generate oscillator mode FEL in 3-250 microns wavelengths range, will consist of normal conducting injector system with 250 keV beam energy, two superconducting RF accelerating modules in order to accelerate the beam 15-40 MeV. The TARLA facility is expected to provide two modes, Continuous wave (CW) and pulsed mode. Longitudinal electron bunch length will be changed between 1 and 10 ps. The bunch charge will be limited by 77pC. The design of the Button-type Beam Position Monitor for TARLA IR FEL is studied to operate in 1.3 GHz. Mechanical antenna design and simulations are completed considering electron beam parameters of TARLA. Ansoft HFSS and CST Particle Studio is used to compare with results of simulations.

OSTI ID:
22590990
Journal Information:
AIP Conference Proceedings, Vol. 1722, Issue 1; Conference: BPU-9: 9. international physics conference of the Balkan Physical Union, Istanbul (Turkey), 24-27 Aug 2015; Other Information: (c) 2016 AIP Publishing LLC; Country of input: International Atomic Energy Agency (IAEA); ISSN 0094-243X
Country of Publication:
United States
Language:
English