skip to main content

Title: Study of micro piezoelectric vibration generator with added mass and capacitance suitable for broadband vibration

This study proposes an optimized frequency adjustment method that uses a micro-cantilever beam-based piezoelectric vibration generator based on a combination of added mass and capacitance. The most important concept of the proposed method is that the frequency adjustment process is divided into two steps: the first is a rough adjustment step that changes the size of the mass added at the end of cantilever to adjust the frequency in a large-scale and discontinuous manner; the second step is a continuous but short-range frequency adjustment via the adjustable added capacitance. Experimental results show that when the initial natural frequency of a micro piezoelectric vibration generator is 69.8 Hz, then this natural frequency can be adjusted to any value in the range from 54.2 Hz to 42.1 Hz using the combination of the added mass and the capacitance. This method simply and effectively matches a piezoelectric vibration generator’s natural frequency to the vibration source frequency.
Authors:
; ;  [1]
  1. School of Energy, Power and Mechanical Engineering, North China Electric Power University, Beijing 102206 (China)
Publication Date:
OSTI Identifier:
22493932
Resource Type:
Journal Article
Resource Relation:
Journal Name: AIP Advances; Journal Volume: 5; Journal Issue: 7; Other Information: (c) 2015 Author(s); Country of input: International Atomic Energy Agency (IAEA)
Country of Publication:
United States
Language:
English
Subject:
42 ENGINEERING; CAPACITANCE; ELECTRIC GENERATORS; HZ RANGE; MASS; MECHANICAL VIBRATIONS; PIEZOELECTRICITY