Experimental study of thermodynamics propagation fatigue crack in metals
- Institute of Continuous Media Mechanics UrB RAS, Perm, 614013 (Russian Federation)
This work is devoted to the development of an experimental method for studying the energy balance during cyclic deformation and fracture. The studies were conducted on 304 stainless steel AISE samples. The investigation of the fatigue crack propagation was carried out on flat samples with stress concentrators. The stress concentrator was three central holes. The heat flux sensor was developed based on the Seebeck effect. This sensor was used for measuring the heat dissipation power in the examined samples during the fatigue tests. The measurements showed that the rate of fatigue crack growth depends on the heat flux at the crack tip and there are two propagation mode of fatigue crack with different link between the propagation mode and heat flux from crack tip.
- OSTI ID:
- 22492596
- Journal Information:
- AIP Conference Proceedings, Vol. 1683, Issue 1; Conference: International conference on advanced materials with hierarchical structure for new technologies and reliable structures 2015, Tomsk (Russian Federation), 21-25 Sep 2015; Other Information: (c) 2015 AIP Publishing LLC; Country of input: International Atomic Energy Agency (IAEA); ISSN 0094-243X
- Country of Publication:
- United States
- Language:
- English
Similar Records
The propagation of a circumferential fatigue crack in medium-carbon steel bars under combined torsional and axial loadings
Fatigue Crack Propagation from Notched Specimens of 304 SS in elevated Temperature Aqueous Environment
Related Subjects
36 MATERIALS SCIENCE
71 CLASSICAL AND QUANTUM MECHANICS
GENERAL PHYSICS
CONCENTRATORS
COOLING
CRACK PROPAGATION
CRACKS
DEFORMATION
ENERGY BALANCE
ENERGY LOSSES
FATIGUE
FRACTURES
HEAT FLUX
HEAT TRANSFER
METALS
SEEBECK EFFECT
SENSORS
STAINLESS STEEL-304
STRESSES
THERMAL DIFFUSIVITY
THERMAL EFFLUENTS
THERMODYNAMICS