skip to main content

SciTech ConnectSciTech Connect

Title: Design and development of digital seismic amplifier recorder

A digital seismic recording is a recording technique of seismic data in digital systems. This method is more convenient because it is more accurate than other methods of seismic recorders. To improve the quality of the results of seismic measurements, the signal needs to be amplified to obtain better subsurface images. The purpose of this study is to improve the accuracy of measurement by amplifying the input signal. We use seismic sensors/geophones with a frequency of 4.5 Hz. The signal is amplified by means of 12 units of non-inverting amplifier. The non-inverting amplifier using IC 741 with the resistor values 1KΩ and 1MΩ. The amplification results were 1,000 times. The results of signal amplification converted into digital by using the Analog Digital Converter (ADC). Quantitative analysis in this study was performed using the software Lab VIEW 8.6. The Lab VIEW 8.6 program was used to control the ADC. The results of qualitative analysis showed that the seismic conditioning can produce a large output, so that the data obtained is better than conventional data. This application can be used for geophysical methods that have low input voltage such as microtremor application.
Authors:
; ;  [1]
  1. Department of Physics, ITB (Indonesia)
Publication Date:
OSTI Identifier:
22391485
Resource Type:
Journal Article
Resource Relation:
Journal Name: AIP Conference Proceedings; Journal Volume: 1656; Journal Issue: 1; Conference: APS 2012: 5. Asian Physics Symposium, Bandung (Indonesia), 10-12 Jul 2012; Other Information: (c) 2015 AIP Publishing LLC; Country of input: International Atomic Energy Agency (IAEA)
Country of Publication:
United States
Language:
English
Subject:
71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSICS; ACCURACY; AMPLIFICATION; AMPLIFIERS; ANALOG-TO-DIGITAL CONVERTERS; CONTROL; DESIGN; ELECTRIC POTENTIAL; L CODES; RESISTORS; SEISMIC DETECTORS; SENSORS; SIGNALS