Mechanical characterization of Cu-Zn wire electrode base used in EDM and study of influence of the process of machining on its properties

Journal Article · Mon Mar 30 00:00:00 EDT 2015 · AIP Conference Proceedings

DOI:https://doi.org/10.1063/1.4914286· OSTI ID:22391337

Amirat, B. ^[1]; Aichour, M.; Marouf, T.; Chitroub, M. ^[2]

---

1. Département of Mechanical engineering, University of M.MAMMERI, Tizi Ouzou (Algeria)
2. Engineering and Material Sciences Laboratory, Department of Metallurgy, Polytechnic national school, Algiers (Algeria)

This work is part of a Research National project (PNR) carried out by the group of research of the engineering and material sciences laboratory of the polytechnic national school at Algiers in collaboration with company BCR, which relates to “the characterization of the wire intended for the EDM of matrices metal. The goal of this work is to bring metallographic explanations on the wire electrode used by the machine ROBOFIL 290P, mechanically characterized this wire as of knowing of advantage about the process of its manufacturing (wiredrawing, .) The methods of studies used are it micro Vickers pyramid hardness, the tensile test, optical microscopy and scan electronic microscopy SEM.

• OSTI ID: 22391337
• Journal Information: AIP Conference Proceedings, Vol. 1653, Issue 1; Conference: APMAS 2014: 4. International Congress in Advances in Applied Physics and Materials Science, Fethiye (Turkey), 24-27 Apr 2014; Other Information: (c) 2015 AIP Publishing LLC; Country of input: International Atomic Energy Agency (IAEA); ISSN 0094-243X
• Country of Publication: United States
• Language: English

Related Subjects

36 MATERIALS SCIENCE
COPPER
ELECTRODES
HARDNESS
MATRIX MATERIALS
METALLOGRAPHY
OPTICAL MICROSCOPY
SCANNING ELECTRON MICROSCOPY
TENSILE PROPERTIES
VICKERS HARDNESS
WIRES
ZINC