skip to main content

SciTech ConnectSciTech Connect

Title: Laser scanner data processing and 3D modeling using a free and open source software

The laser scanning is a technology that allows in a short time to run the relief geometric objects with a high level of detail and completeness, based on the signal emitted by the laser and the corresponding return signal. When the incident laser radiation hits the object to detect, then the radiation is reflected. The purpose is to build a three-dimensional digital model that allows to reconstruct the reality of the object and to conduct studies regarding the design, restoration and/or conservation. When the laser scanner is equipped with a digital camera, the result of the measurement process is a set of points in XYZ coordinates showing a high density and accuracy with radiometric and RGB tones. In this case, the set of measured points is called “point cloud” and allows the reconstruction of the Digital Surface Model. Even the post-processing is usually performed by closed source software, which is characterized by Copyright restricting the free use, free and open source software can increase the performance by far. Indeed, this latter can be freely used providing the possibility to display and even custom the source code. The experience started at the Faculty of Engineering in Catania is aimed at findingmore » a valuable free and open source tool, MeshLab (Italian Software for data processing), to be compared with a reference closed source software for data processing, i.e. RapidForm. In this work, we compare the results obtained with MeshLab and Rapidform through the planning of the survey and the acquisition of the point cloud of a morphologically complex statue.« less
Authors:
 [1] ; ; ;  [2]
  1. Dept. of Industrial and Mechanical Engineering, University of Catania (Italy)
  2. Dept. of Civil Engineering and Architecture, University of Catania (Italy)
Publication Date:
OSTI Identifier:
22391146
Resource Type:
Journal Article
Resource Relation:
Journal Name: AIP Conference Proceedings; Journal Volume: 1648; Journal Issue: 1; Conference: ICNAAM-2014: International Conference on Numerical Analysis and Applied Mathematics 2014, Rhodes (Greece), 22-28 Sep 2014; Other Information: (c) 2015 AIP Publishing LLC; Country of input: International Atomic Energy Agency (IAEA)
Country of Publication:
United States
Language:
English
Subject:
71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSICS; ACCURACY; CAMERAS; COMPARATIVE EVALUATIONS; COMPUTER CODES; COMPUTERIZED SIMULATION; COORDINATES; DATA PROCESSING; DENSITY; LASER RADIATION; LASERS; PERFORMANCE; SIGNALS; SURFACES; THREE-DIMENSIONAL CALCULATIONS