Resonance frequency-retuned quartz tuning fork as a force sensor for noncontact atomic force microscopy
- Natural Science and Technology, Kanazawa University, Kanazawa, Ishikawa 920-1192 (Japan)
- Japan Advanced Institute of Science and Technology, Nomi, Ishikawa 923-1292 (Japan)
Based on a two-prong type quartz tuning fork, a force sensor with a high Q factor, which we call a retuned fork sensor, was developed for non-contact atomic force microscopy (nc-AFM) with atomic resolution. By cutting a small notch and attaching an AFM tip to one prong, its resonance frequency can be retuned to that of the other intact prong. In balancing the two prongs in this manner, a high Q factor (>50 000 in ultrahigh vacuum) is obtained for the sensor. An atomic resolution image of the Si(111)-7 × 7 surface was demonstrated using an nc-AFM with the sensor. The dependence of the Q factor on resonance frequency of the sensor and the long-range force between tip and sample were measured and analyzed in view of the various dissipation channels. Dissipation in the signal detection circuit turned out to be mainly limited by the total Q factor of the nc-AFM system.
- OSTI ID:
- 22311246
- Journal Information:
- Applied Physics Letters, Vol. 105, Issue 4; Other Information: (c) 2014 Author(s); Country of input: International Atomic Energy Agency (IAEA); ISSN 0003-6951
- Country of Publication:
- United States
- Language:
- English
Similar Records
Atomic force microscopy imaging using a tip-on-chip: Opening the door to integrated near field nanotools
Nanopipette combined with quartz tuning fork-atomic force microscope for force spectroscopy/microscopy and liquid delivery-based nanofabrication