Synthesis of cobalt alloy through smelting method and its characterization as prosthesis bone implant
- Department of physics, Faculty of Science and Technology, Airlangga University (Indonesia)
Cobalt-based alloys are widely used as total hip and knee replacements because of their excellent properties, such as corrosion resistance, fatigue strength and biocompatibility. In this work, cobalt alloys with variation of Cr (28.5; 30; 31.5; 33, and 34.5% wt) have been synthesized by smelting method began with the process of compaction, followed by smelting process using Tri Arc Melting Furnace at 200A. Continued by homogenization process at recrystallization temperature (1250° C) for 3 hours to allow the atoms diffuses and transform into γ phase. The next process is rolling process which is accompanied by heating at 1200° C for ± 15 minutes and followed by quenching. This process is repeated until the obtained thickness of ± 1 mm. The evaluated material properties included microstructure, surface morphology, and hardness value. It was shown that microstructure of cobalt alloys with variation of Cr is dominant by γ phase, thus making the entire cobalt alloys have high hardness. It was also shown from the surface morphology of entire cobalt alloys sample indicated the whole process of synthesis that had good solubility were at flat surface area. Hardness value test showed all of cobalt alloys sample had high hardness, just variation of 33% Cr be in the range of ASTMF75, it were 345,24 VHN which is potential to be applied as an implant prosthesis.
- OSTI ID:
- 22307900
- Journal Information:
- AIP Conference Proceedings, Vol. 1617, Issue 1; Conference: ICTAP 2013: 3. international conference on theoretical and applied physics, Malang, East Java (Indonesia), 10-11 Oct 2013; Other Information: (c) 2014 AIP Publishing LLC; Country of input: International Atomic Energy Agency (IAEA); ISSN 0094-243X
- Country of Publication:
- United States
- Language:
- English
Similar Records
Microstructure and deformation behavior of nickel based superalloy Inconel 740 prepared by electron beam smelting
Investigation of the effects of intense pulsed particle beams on the durability of metal-to-plastic interfaces.