skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Surface loss probability of atomic hydrogen for different electrode cover materials investigated in H₂-Ar low-pressure plasmas

Journal Article · · Journal of Applied Physics
DOI:https://doi.org/10.1063/1.4886123· OSTI ID:22306244
;  [1];  [2]
  1. Max-Planck-Institut für Plasmaphysik, Boltzmannstraße 2, D-85748 Garching (Germany)
  2. Institute for Experimental and Applied Physics, Christian-Albrechts-Universität zu Kiel, Leibnizstraße 11-19, D-24098 Kiel (Germany)

In an inductively coupled H₂-Ar plasma at a total pressure of 1.5 Pa, the influence of the electrode cover material on selected line intensities of H, H₂, and Ar are determined by optical emission spectroscopy and actinometry for the electrode cover materials stainless steel, copper, tungsten, Macor{sup ®}, and aluminum. Hydrogen dissociation degrees for the considered conditions are determined experimentally from the measured emission intensity ratios. The surface loss probability β{sub H} of atomic hydrogen is correlated with the measured line intensities, and β{sub H} values are determined for the considered materials. Without the knowledge of the atomic hydrogen temperature, β{sub H} cannot be determined exactly. However, ratios of β{sub H} values for different surface materials are in first order approximation independent of the atomic hydrogen temperature. Our results show that β{sub H} of copper is equal to the value of stainless steel, β{sub H} of Macor{sup ®} and tungsten is about 2 times smaller and β{sub H} of aluminum about 5 times smaller compared with stainless steel. The latter ratio is in reasonable agreement with literature. The influence of the atomic hydrogen temperature T{sub H} on the absolute value is thoroughly discussed. For our assumption of T{sub H}=600 K, we determine a β{sub H} for stainless steel of 0.39±0.13.

OSTI ID:
22306244
Journal Information:
Journal of Applied Physics, Vol. 116, Issue 1; Other Information: (c) 2014 EURATOM; Country of input: International Atomic Energy Agency (IAEA); ISSN 0021-8979
Publisher:
American Institute of Physics (AIP)
Country of Publication:
United States
Language:
English

Similar Records

Effects of outgassing of loader chamber walls on hydriding of thin films for commercial applications
Journal Article · Tue Jul 01 00:00:00 EDT 2014 · Journal of Vacuum Science and Technology. A, Vacuum, Surfaces and Films · OSTI ID:22306244

Comments on cathode contaminants and the LBNL test stand
Technical Report · Mon Nov 13 00:00:00 EST 2006 · OSTI ID:22306244

Ion chemistry in H{sub 2}-Ar low temperature plasmas
Journal Article · Wed Aug 14 00:00:00 EDT 2013 · Journal of Applied Physics · OSTI ID:22306244