skip to main content

SciTech ConnectSciTech Connect

Title: A futuristic approach towards interface layer modifications for improved efficiency in inverted organic solar cells

Inverted polymer Solar Cells of the classical poly (3-hexylthiophene) (P3HT):(6,6)-phenyl-C{sub 61}butyric acid methyl ester (PC{sub 61}BM) blend on indium tin oxide substrates were fabricated, which shows improved device performance, by using a facile solution–processed ZnO-polyelectrolytes [poly (diallyldimethylammonium chloride) (PDADMAC), Poly (acrylic acid sodium salt) (PAS), poly (4-styrenesulfonic acid) (PSS), and Polyvinylpyrrolidone (PVP)] nanocomposite as a cathode interface layer compared to devices using pristine ZnO as cathode buffer layer in ambient conditions. The devices with different combinations of polyelectrolyte with ZnO show different improvements in the device efficiency. The combinations of ZnO with PVP and PDADMAC show highest amount of improvements in the efficiency by a factor of ∼17–19. The improvement of the efficiency may be due to various phenomena, such as the passivation of ZnO surface as well as bulk traps, work function modification, improved energy level alignment, improved electronic coupling of the inorganic/organic interface, improved light harvesting, and decrease of surface as well as bulk charge recombination in the device. The introduction of polyelectrolyte into ZnO inhibits the aggregation of ZnO nanoparticles yielding the large area ZnO nanoclusters; and hence, forming the uniform film of ZnO resulting in the modifications of morphology as well as electronic structure of ZnO-polyelectrolytemore » nano-composite favouring better electronic coupling between cathode and active layer and hence enhancing the current and, consequently, the efficiency. This simple low temperature ZnO-polyelectrolyte nanocomposite based protocol proposed for cathode interface layer modification may be very much useful for roll to roll industrial manufacturing of organic solar cells.« less
Authors:
; ; ;  [1] ; ;  [1] ;  [2]
  1. Physics of Energy Harvesting Division (Organic and Hybrid Solar Cell Group), CSIR-National Physical Laboratory, CSIR-Network of Institutes for Solar Energy (NISE), Dr. K. S. Krishnan Marg, New Delhi 110012 (India)
  2. (India)
Publication Date:
OSTI Identifier:
22280529
Resource Type:
Journal Article
Resource Relation:
Journal Name: Applied Physics Letters; Journal Volume: 104; Journal Issue: 4; Other Information: (c) 2014 AIP Publishing LLC; Country of input: International Atomic Energy Agency (IAEA)
Country of Publication:
United States
Language:
English
Subject:
75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND SUPERFLUIDITY; 77 NANOSCIENCE AND NANOTECHNOLOGY; ACRYLIC ACID; AMINO ACIDS; CATHODES; COMPARATIVE EVALUATIONS; COMPOSITE MATERIALS; ELECTRONIC STRUCTURE; ENERGY EFFICIENCY; ENERGY LEVELS; INDIUM COMPOUNDS; INTERFACES; LAYERS; NANOSTRUCTURES; ORGANIC SOLAR CELLS; PVP; THIN FILMS; TIN OXIDES; VISIBLE RADIATION; WORK FUNCTIONS; ZINC OXIDES