Effect of Co on the thermal stability and magnetic properties of AlNiCo 8 alloys
- Division of Functional Material, Central Iron and Steel Research Institute, Beijing (China)
The magnetic properties, microstructure, and reversible temperature coefficient of magnetic flux of Alnico 8 alloys with the different Co and Ti have been investigated in this paper. The Alnico alloys containing 34, 36, 38, and 40 mass percent cobalt were fabricated by the conventional casting method including thermomagnetic treatment. The transmission electron microscopy (TEM) testing shows that there are more α1 phases particles with the diameter of less than 10 nm appearing in the matrix with the increasing of the content of Co and Ti. The thermal stability of Alnico 8 alloys deteriorates with the increasing of the content of Co and Ti, which are caused mainly by the decrease of the degree of particle alignment and particle perfection.
- OSTI ID:
- 22273752
- Journal Information:
- Journal of Applied Physics, Vol. 115, Issue 17; Conference: 55. annual conference on magnetism and magnetic materials, Atlanta, GA (United States), 14-18 Nov 2010; Other Information: (c) 2014 AIP Publishing LLC; Country of input: International Atomic Energy Agency (IAEA); ISSN 0021-8979
- Country of Publication:
- United States
- Language:
- English
Similar Records
Compression Molding and Novel Sintering Treatments for Alnico Type-8 Permanent Magnets in Near-Final Shape with Preferred Orientation
Manufacturing of Advanced Alnico Magnets for Energy Efficient Traction Drive Motors CRADA Final Report