skip to main content

Title: Design and development of thermoelectric generator

In this paper we discuss the fabrication, working and characteristics of a thermoelectric generator made up of p and n type semiconductor materials. The device consists of Fe{sub 0.2}Co{sub 3.8}Sb{sub 11.5}Te{sub 0.5} (zT = 1.04 at 818 K) as the n-type and Zn4Sb3 (zT=0.8 at 550 K) as the p-type material synthesized by vacuum hot press method. Carbon paste has been used to join the semiconductor legs to metal (Molybdenum) electrodes to reduce the contact resistance. The multi-couple (4 legs) generator results a maximum output power of 1.083 mW at a temperature difference of 240 K between the hot and cold sides. In this investigation, an I-V characteristic, maximum output power of the thermoelectric module is presented. The efficiency of thermoelectric module is obtained as η = 0.273 %.
Authors:
; ; ;  [1]
  1. Thermoelectric Materials and Devices Laboratory, Department of Physics, Indian Institute of Science, Bangalore-560012 (India)
Publication Date:
OSTI Identifier:
22269527
Resource Type:
Journal Article
Resource Relation:
Journal Name: AIP Conference Proceedings; Journal Volume: 1591; Journal Issue: 1; Conference: 58. DAE solid state physics symposium 2013, Patiala, Punjab (India), 17-21 Dec 2013; Other Information: (c) 2014 AIP Publishing LLC; Country of input: International Atomic Energy Agency (IAEA)
Country of Publication:
United States
Language:
English
Subject:
75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND SUPERFLUIDITY; ANTIMONY TELLURIDES; CARBON; COBALT COMPOUNDS; DESIGN; ELECTRIC CONDUCTIVITY; ENERGY EFFICIENCY; FABRICATION; IRON COMPOUNDS; MOLYBDENUM; N-TYPE CONDUCTORS; P-TYPE CONDUCTORS; THERMOELECTRIC GENERATORS NESDPS Office of Nuclear Energy Space and Defense Power Systems