Investigation into springback characteristics of two HSS sheets during cold v-bending
- Department of Mechanical Engineering, Tsinghua University, Beijing 100084 (China)
Considering the safety and the light-weight structure, there is an increasing requirement of high strength steel (HSS) sheets in the automotive industry. The high-precise prediction of the springback depends on constitutive equations and their corresponding material parameters. In order to investigate the springback of HSS sheets, DP590 and B280VK, their constitutive behaviors were analyzed based on the sheet tension tests. With respect to the constitutive equation, the Voce model is more proper to two hot-rolled steels, DP590 and B280VK, than the Swift model. Two steels are all saturated hardening, and the degree of hardening decreases with the strain. The cold v-banding tests of two HSS sheets were carried out for evaluation of springback characteristics. Results of v-bending experiments showed that the springback angle increases with the bending along 45°, 90° and 0° to the rolling direction of steel in turn.
- OSTI ID:
- 22261669
- Journal Information:
- AIP Conference Proceedings, Vol. 1567, Issue 1; Conference: NUMISHEET 2014: 9. international conference and workshop on numerical simulation of 3D sheet metal forming processes, Melbourne (Australia), 6-10 Jan 2014; Other Information: (c) 2013 AIP Publishing LLC; Country of input: International Atomic Energy Agency (IAEA); ISSN 0094-243X
- Country of Publication:
- United States
- Language:
- English
Similar Records
Springback Analysis of Draw-Bending of 980 MPa Cold Rolled Steel Sheet and Its Experimental Validation
Die Face Engineering based Springback Compensation Strategy and Implementation