skip to main content

Title: Design study of the geometry of the blanking tool to predict the burr formation of Zircaloy-4 sheet

In this work, we investigated factors that influence burr formation for zircaloy-4 sheet used for spacer grids of nuclear fuel roads. Factors we considered are geometric factors of punch. We changed clearance and velocity in order to consider the failure parameters, and we changed shearing angle and corner radius of L-shaped punch in order to consider geometric factors of punch. First, we carried out blanking test with failure parameter of GTN model using L-shaped punch. The tendency of failure parameters and geometric factors that affect burr formation by analyzing sheared edges is investigated. Consequently, geometric factor's influencing on the burr formation is also high as failure parameters. Then, the sheared edges and burr formation with failure parameters and geometric factors is investigated using FE analysis model. As a result of analyzing sheared edges with the variables, we checked geometric factors more affect burr formation than failure parameters. To check the reliability of the FE model, the blanking force and the sheared edges obtained from experiments are compared with the computations considering heat transfer.
Authors:
; ; ;  [1]
  1. Sogang University, Department of Mechanical Engineering, Seoul, 121-742 (Korea, Republic of)
Publication Date:
OSTI Identifier:
22261655
Resource Type:
Journal Article
Resource Relation:
Journal Name: AIP Conference Proceedings; Journal Volume: 1567; Journal Issue: 1; Conference: NUMISHEET 2014: 9. international conference and workshop on numerical simulation of 3D sheet metal forming processes, Melbourne (Australia), 6-10 Jan 2014; Other Information: (c) 2013 AIP Publishing LLC; Country of input: International Atomic Energy Agency (IAEA)
Country of Publication:
United States
Language:
English
Subject:
97 MATHEMATICAL METHODS AND COMPUTING; CALCULATION METHODS; FAILURES; HEAT TRANSFER; SHEAR; ZIRCALOY 4