Monitoring of ultraviolet pulse rate dependent photomechanical actuation in carbon nanotubes using fiber Bragg gratings
- Department of Instrumentation and Applied Physics, Indian Institute of Science, Bangalore (India)
In this Letter, we present a non-contact method of controlling and monitoring photomechanical actuation in carbon nanotubes (CNT) by exposing it to ultra-violet radiation at different pulse rates (10 to 200 Hz). This is accomplished by imparting a reversible photo induced strain (5–330 με) on CNT coated fibre Bragg gratings; CNT undergoes an internal reversible structural change due to cyclic photon absorption that leads to the development of mechanical strain, which in turn allows reversible switching of the Bragg wavelength. The results also reveal an interesting pulse rate dependent rise and fall times of photomechanical actuation in CNT.
- OSTI ID:
- 22257147
- Journal Information:
- Applied Physics Letters, Vol. 104, Issue 1; Other Information: (c) 2014 AIP Publishing LLC; Country of input: International Atomic Energy Agency (IAEA); ISSN 0003-6951
- Country of Publication:
- United States
- Language:
- English
Similar Records
Embedded Fiber Bragg Grating (FBG) Sensors Fabricated by Ultrasonic Additive Manufacturing for High-Frequency Dynamic Strain Measurements
Control over the resonance wavelength of fibre Bragg gratings using resistive coatings based on single-wall carbon nanotubes
Note: Strain sensitivity comparison between fiber Bragg gratings inscribed on 125 and 80 micron cladding diameter fibers, case study on the solidification monitoring of a photo-curable resin
Journal Article
·
Thu Dec 21 00:00:00 EST 2023
· IEEE Sensors Journal
·
OSTI ID:22257147
+9 more
Control over the resonance wavelength of fibre Bragg gratings using resistive coatings based on single-wall carbon nanotubes
Journal Article
·
Sat Oct 01 00:00:00 EDT 2016
· Quantum Electronics (Woodbury, N.Y.)
·
OSTI ID:22257147
+2 more
Note: Strain sensitivity comparison between fiber Bragg gratings inscribed on 125 and 80 micron cladding diameter fibers, case study on the solidification monitoring of a photo-curable resin
Journal Article
·
Sun Feb 15 00:00:00 EST 2015
· Review of Scientific Instruments
·
OSTI ID:22257147