Design Study of an Incinerator Ash Conveyor Counting System - 13323
- Canberra Industries Inc., 800 Research Parkway Meriden CT 06450 (United States)
A design study has been performed for a system that should measure the Cs-137 activity in ash from an incinerator. Radioactive ash, expected to consist of both Cs-134 and Cs-137, will be transported on a conveyor belt at 0.1 m/s. The objective of the counting system is to determine the Cs-137 activity and direct the ash to the correct stream after a diverter. The decision levels are ranging from 8000 to 400000 Bq/kg and the decision error should be as low as possible. The decision error depends on the total measurement uncertainty which depends on the counting statistics and the uncertainty in the efficiency of the geometry. For the low activity decision it is necessary to know the efficiency to be able to determine if the signal from the Cs-137 is above the minimum detectable activity and that it generates enough counts to reach the desired precision. For the higher activity decision the uncertainty of the efficiency needs to be understood to minimize decision errors. The total efficiency of the detector is needed to be able to determine if the detector will be able operate at the count rate at the highest expected activity. The design study that is presented in this paper describes how the objectives of the monitoring systems were obtained, the choice of detector was made and how ISOCS (In Situ Object Counting System) mathematical modeling was used to calculate the efficiency. The ISOCS uncertainty estimator (IUE) was used to determine which parameters of the ash was important to know accurately in order to minimize the uncertainty of the efficiency. The examined parameters include the height of the ash on the conveyor belt, the matrix composition and density and relative efficiency of the detector. (authors)
- Research Organization:
- WM Symposia, 1628 E. Southern Avenue, Suite 9-332, Tempe, AZ 85282 (United States)
- OSTI ID:
- 22225053
- Report Number(s):
- INIS-US-13-WM-13323; TRN: US14V0509046008
- Resource Relation:
- Conference: WM2013: Waste Management Conference: International collaboration and continuous improvement, Phoenix, AZ (United States), 24-28 Feb 2013; Other Information: Country of input: France; 5 refs.
- Country of Publication:
- United States
- Language:
- English
Similar Records
Design Process for the Development of a New Truck Monitoring System - 13306
Rapid HPGE gamma spectroscopic mapping of transuranic and high energy gamma ray-emitting radionuclides for remediation planning
Related Subjects
61 RADIATION PROTECTION AND DOSIMETRY
12 MANAGEMENT OF RADIOACTIVE WASTES, AND NON-RADIOACTIVE WASTES FROM NUCLEAR FACILITIES
ACCURACY
ASHES
CESIUM 134
CESIUM 137
CONVEYORS
COUNTING RATES
DESIGN
INCINERATORS
RADIATION DETECTION
RADIATION DETECTORS