Application of ITO/Al reflectors for increasing the efficiency of single-crystal silicon solar cells
- National Technical University, 'Kharkiv Poly technical Institute' (Ukraine)
It is shown that an increase in the efficiency and manufacturability of single-junction single-crystal silicon photoelectric converters of solar energy requires the use of a back-surface reflector based on conductive transparent indium-tin oxide (ITO) 0.25-2 {mu}m thick. To increase the efficiency and reduce the sensitivity to the angle of light incidence on the photoreceiving surface of multijunction photoelectric converters with vertical diode cells based on single-crystal silicon, ITO/Al reflectors with an ITO layer >1 {mu}m thick along vertical boundaries of diode cells should be fabricated. The experimental study of multijunction photoelectric converters with ITO/Al reflectors at diode cell boundaries shows the necessity of modernizing the used technology of ITO layers to achieve their theoretically calculated thickness.
- OSTI ID:
- 21562277
- Journal Information:
- Semiconductors, Vol. 44, Issue 6; Other Information: DOI: 10.1134/S106378261006014X; Copyright (c) 2010 Pleiades Publishing, Ltd.; ISSN 1063-7826
- Country of Publication:
- United States
- Language:
- English
Similar Records
Research on Stable, High-Efficiency Amorphous Silicon Multijunction Modules, Semiannual Subcontract Report, 1 August 1989 - 31 January 1991
Amorphous silicon research project government/industry program
Related Subjects
AUGMENTATION
EFFICIENCY
INDIUM
LAYERS
MONOCRYSTALS
SENSITIVITY
SILICON
SILICON SOLAR CELLS
SOLAR ENERGY
SURFACES
THICKNESS
TIN OXIDES
CHALCOGENIDES
CRYSTALS
DIMENSIONS
DIRECT ENERGY CONVERTERS
ELEMENTS
ENERGY
ENERGY SOURCES
EQUIPMENT
METALS
OXIDES
OXYGEN COMPOUNDS
PHOTOELECTRIC CELLS
PHOTOVOLTAIC CELLS
RENEWABLE ENERGY SOURCES
SEMIMETALS
SOLAR CELLS
SOLAR EQUIPMENT
TIN COMPOUNDS