Measurements of the plasma density in the FTU tokamak by a pulsed time-of-flight X-wave refractometer
- Troitsk Institute for Innovation and Fusion Research (Russian Federation)
- l'Energia el'Ambiente (ENEA), Entre per le Nuove Tecnologie (Italy)
On-line control over the plasma density in tokamaks (especially, in long-term discharges) requires reliable measurements of the averaged plasma density. For this purpose, a new method of density measurements-a pulsed time-of-flight plasma refractometry-was developed and tested in the T-11M tokamak. This method allows one to determine the averaged density from the measured time delay of nanosecond microwave pulses propagating through the plasma. For an O-wave, the measured time delay is proportional to the line-averaged density and is independent of the density profile (f>>f{sub p}) {tau}{sub o} {approx} k{sub o} 1/f{sup 2} {integral}{sub l} N(x)dx. Here, f is the frequency of the probing wave, f{sub p} is the plasma frequency, l= 4 a is the path length for two-pass probing in the equatorial plane, a is the plasma minor radius, k{sub O} and k{sub X} are numerical factors, f{sub c} is the electron-cyclotron frequency at the axis of the plasma column, and f{sub p}>>f{sub c}, f. Measurements of the time delay provide the same information as plasma interferometry, though they do no employ the effect of interference. When the conditions f{sub p}>>f{sub c}, f are not satisfied, the measured time delay depends on the shape of the density profile. In this case, in order to determine the average density regardless of the density profile, it is necessary to perform simultaneous measurements at several probing frequencies in order to determine the average density. In ITER (Bt {approx} 5T), a spectral window between the lower and upper cutoff frequencies in the range of 50-100 GHz can be used for pulsed time-of-flight X-wave refractometry. This appreciably simplifies the diagnostics and eliminates the problem of the first mirror. In this paper, the first results obtained in the FTU tokamak with a prototype of the ITER pulsed time-of-flight refractometer are presented. The geometry and layout of experiments similar to the planned ITER experiments are described. The density measured by pulsed time-of-flight refractometry is shown to agree well with the results obtained in FTU with a two-frequency scanning IR interferometer. The results obtained are analyzed, and the future experiments are discussed.
- OSTI ID:
- 21399945
- Journal Information:
- Plasma Physics Reports, Vol. 34, Issue 1; Other Information: DOI: 10.1134/S1063780X08010030; Copyright (c) 2008 Pleiades Publishing, Ltd.; ISSN 1063-780X
- Country of Publication:
- United States
- Language:
- English
Similar Records
Chapter 3: Internal Transport Barrier Studies in the FTU
Recent results of the ion Bernstein wave heating experiment on FTU