skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Synthesis of belite cement clinker of high hydraulic reactivity

Journal Article · · Cement and Concrete Research
 [1];  [2];  [3];  [4];  [1]
  1. Laboratoire de Genie des Procedes, Departement de Chimie, Universite des Sciences et de la Technologie d'Oran, B.P. 1505, El-M'nouar, U.S.T. Oran (Algeria)
  2. Laboratoire des Materiaux a Porosite Controlee, CNRS UMR 7016, Universite de Haute-Alsace, 3, rue Alfred-Werner, F-68093 Mulhouse cedex (France)
  3. Departement d'Architecture, Faculte de Genie Civile, USTO-Oran (Algeria)
  4. Departement de Chimie, U.A.I.B., Route de Belahcel, Mostaganem (Algeria)

This study is concerned with the increase of the cooling rate of belite clinker, by using the water quenching for the chemical stabilization of reactive belite, which improves the hydraulic properties of this clinker. The addition of adequate mineralizers, as NaF and Fe{sub 2}O{sub 3}, contributes to the improvement of the clinker properties obtained at low burning temperature. X-ray fluorescence spectroscopy, X-ray diffraction analysis and optical microscopy were used to determine the chemical and mineralogical compositions of this clinker. The samples were analyzed by means of a scanning electronic microscope connected with an energy-dispersive X-ray spectrometer to detect the composition of the belite phase and its morphology. Physical and mechanical properties of this clinker cement were determined. The results show that the belite clinker obtained at 1150 {sup o}C, with lime saturation factor 0.67, is characterized by a great hydraulic reactivity, similar to that of the ordinary alite clinker. The addition of 2% of NaF and the water quenching improved the chemical, mineralogical and structural properties, while improving the cement hydraulic properties.

OSTI ID:
21260489
Journal Information:
Cement and Concrete Research, Vol. 39, Issue 7; Other Information: DOI: 10.1016/j.cemconres.2009.02.004; PII: S0008-8846(09)00089-1; Copyright (c) 2009 Elsevier Science B.V., Amsterdam, The Netherlands, All rights reserved; Country of input: International Atomic Energy Agency (IAEA); ISSN 0008-8846
Country of Publication:
United States
Language:
English