ULTRASONIC DETECTION OF SURFACE-BREAKING RAILHEAD DEFECTS
- University of Warwick, Department of Physics, Coventry CV4 7AL (United Kingdom)
- University of Birmingham, School of Engineering, Birmingham (United Kingdom)
We recently presented measurements of defects on the railhead, using a novel pitch-catch ultrasonic system comprising of two electro-magnetic acoustic transducers (EMATs) generating and detecting Rayleigh waves. Current systems used on the UK rail network for detecting surface breaking defects are limited in speed (<30 mph) and accuracy (depths >5 mm). The non-contact EMAT system has the potential to operate at higher line speed, improving network inspection coverage. The current system detects signals and performs an FFT in less than 1 ms, and changes in the detected signal amplitude and frequency content are used to characterise defects. A new set of simulated defects on sections of rail have been produced, including half-face slots machined normal to the railhead surface, clusters of angled slots, and pocket defects more typical of real defects. The smallest pocket defects are difficult to detect, with changes in signal amplitude and cut-off falling close to the noise level. However, at chosen higher frequencies a drop in FFT magnitude indicates the presence of a defect, and this indicator can be logically combined with amplitude and cut-off measurements to provide a more reliable result. Preparation for testing on a rotating rail rig at high speeds is ongoing.
- OSTI ID:
- 21210238
- Journal Information:
- AIP Conference Proceedings, Vol. 975, Issue 1; Conference: 34. annual review of progress in quantitative nondestructive evaluation, Golden, CO (United States), 22-27 Jul 2007; Other Information: DOI: 10.1063/1.2902716; (c) 2008 American Institute of Physics; Country of input: International Atomic Energy Agency (IAEA); ISSN 0094-243X
- Country of Publication:
- United States
- Language:
- English
Similar Records
Improved detection of rough defects for ultrasonic NDE inspections based on finite element modeling of elastic wave scattering
Evaluating the Effectiveness of an Ultrasonic Acoustic Deterrent in Reducing Bat Fatalities at Wind Energy Facilities