Modeling coal combustion behavior in an ironmaking blast furnace raceway: model development and applications
- BlueScope Steel Research Laboratories, Port Kembla, NSW (Australia)
A numerical model has been developed and validated for the investigation of coal combustion phenomena under blast furnace operating conditions. The model is fully three-dimensional, with a broad capacity to analyze significant operational and equipment design changes. The model was used in a number of studies, including: Effect of cooling gas type in coaxial lance arrangements. It was found that oxygen cooling improves coal burnout by 7% compared with natural gas cooling under conditions that have the same amount of oxygen enrichment in the hot blast. Effect of coal particle size distribution. It was found that during two similar periods of operation at Port Kembla's BF6, a difference in PCI capability could be attributed to the difference in coal size distribution. Effect of longer tuyeres. Longer tuyeres were installed at Port Kembla's BF5, leading to its reline scheduled for March 2009. The model predicted an increase in blast velocity at the tuyere nose due to the combustion of volatiles within the tuyere, with implications for tuyere pressure drop and PCI capability. Effect of lance tip geometry. A number of alternate designs were studied, with the best-performing designs promoting the dispersion of the coal particles. It was also found that the base case design promoted size segregation of the coal particles, forcing smaller coal particles to one side of the plume, leaving larger coal particles on the other side. 11 refs., 15 figs., 4 tabs.
- OSTI ID:
- 21176746
- Journal Information:
- Iron and Steel Technology, Vol. 6, Issue 3; ISSN 1547-0423
- Country of Publication:
- United States
- Language:
- English
Similar Records
The effect of pulverized coal injection and volatile matter content of coal on combustion characteristics around the raceway zone in the blast furnace
Numerical analysis for the multi-phase flow of pulverized coal injection inside blast furnace tuyere