MELCOR 1.8.5 Simulation of TMI-2 Phase 2 With an Enhanced 2-Dimensional In-Vessel Natural Circulation Model
- Sandia National Laboratories, Albuquerque NM, 87112 (United States)
- ITS Corporation, 300 E. Esplanade Drive, Suite 1450, Oxnard, CA 93036-1282 (United States)
Phase 2 of the TMI-2 accident (core uncover and melting) is revisited with the latest release of MELCOR (i.e., Version 1.8.5). An enhanced multi-ring multi-level hydro nodalization of the reactor core and upper plenum was developed to permit calculation of natural convection heat transfer between the core and upper internals. Uncertainties in boundary and initial conditions are investigated with particular attention given to the distribution of liquid in the RCS at the beginning of Phase 2 and to the histories of pressure and level in the steam generators. Special attention given to modeling the boiler sides of the once-through steam generators is presented. The modeling is designed to capture the rapid condensation of RCS vapor that would result from spraying cold auxiliary feedwater directly onto the upper portion of a voided steam generator tube bundle. Presentation of key Phase-2 accident signatures including fuel temperatures and hydrogen generation are presented. Comparisons are made between MELCOR calculations, TMI-2 data, and SCDAP/RELAP simulations. A largely improved MELCOR simulation of TMI-2 Phase 2 is obtained. (authors)
- Research Organization:
- The ASME Foundation, Inc., Three Park Avenue, New York, NY 10016-5990 (United States)
- OSTI ID:
- 21072873
- Resource Relation:
- Conference: ICONE-10: 10. international conference on nuclear engineering, Arlington - Virginia (United States), 14-18 Apr 2002; Other Information: Country of input: France
- Country of Publication:
- United States
- Language:
- English
Similar Records
Accident Source Terms for Pressurized Water Reactors with High-Burnup Cores Calculated using MELCOR 1.8.5.
Comparison of Severe Accident Results Among SCDAP/RELAP5, MAAP, and MELCOR Codes