Modeling Cladding-Coolant Heat Transfer of High-Burnup Fuel During RIA
- Massachusetts Institute of Technology, 77 Massachusetts avenue Cambridge, MA 02139-4307 (United States)
This paper describes a model for the cladding-coolant heat transfer of high burnup fuel during a Reactivity Initiated Accident (RIA) which is implemented in the fuel performance code FRAPTRAN 1.2. The minimum stable film boiling temperature, affected by the subcooling and the clad oxidation, is modeled by a modified Henry correlation. This accounts for the effects of thermal properties of the cladding surface on the transient temperature drop during liquid-solid contact. The transition boiling regime is described as the interpolation of the heat flux between two anchor points on the boiling curve: the Critical Heat Flux (CHF) and minimum stable film boiling. The CHF correlation is based on the Zuber hydrodynamic model multiplied by a subcooling factor. Frederking correlation is chosen to model the film boiling regime. The heat conduction through the oxide layer of the cladding surface of high burnup fuel is calculated by solving heat conduction equations with thermal properties of zirconia taken from MATPRO. This model is validated in the FRAPTRAN code for test cases of both high burnup and fresh test fuel rods including the burnup level (0--56 MW d/kg), peak fuel enthalpy deposit (70--190 cal/g), degree of subcooling (0--80 deg. C), and extent of oxidation (0--25 micron). The modified code demonstrates the capability of differentiating between the departure from nucleate boiling (DNB) and none-DNB cases. The predicted peak cladding temperature (PCT) and duration of DNB achieves generally good agreement with the experimental data. It is found that the cladding surface oxidation of high burnup fuel causes an early rewetting of cladding or suppresses DNB due to two factors: 1) Thick zirconia layer may delay the heat conducted to the surface while keeping the surface heat transfer in the most effective nucleate boiling regime. 2) The transient liquid-solid contact resulting from vapor breaking down would cause a lower interface temperature for an oxidized surface, essentially raises the minimum stable film boiling temperature. (authors)
- Research Organization:
- The ASME Foundation, Inc., Three Park Avenue, New York, NY 10016-5990 (United States)
- OSTI ID:
- 20997114
- Resource Relation:
- Conference: 14. International conference on nuclear engineering (ICONE 14), Miami - Florida (United States), 17-20 Jul 2006; Other Information: Country of input: France
- Country of Publication:
- United States
- Language:
- English
Similar Records
Bison Fuel Performance Modeling on RIA in a PWR
Multi-Functional Zirconium-Silicide Coatings on Zirconium-alloy for Improved Accident Tolerance