Underwater pressure amplification of laser-induced plasma shock waves for particle removal applications
- Department of Mechanical and Aeronautical Engineering, Clarkson University, Potsdam, New York 13699-5725 (United States) and Center for Advanced Materials Processing, Clarkson University, Potsdam, New York 13699-5725 (United States)
Underwater amplification of laser-induced plasma (LIP)-generated transient pressure waves using shock tubes is introduced and demonstrated. Previously, it has been shown that LIP for noncontact particle removal is possible on the sub-100-nm level. This is now enhanced through shock tube utilization in a medium such as water by substantially increasing shock wave pressure for the same pulse energy. A shock tube constrains the volume and changes the propagation direction of the expanding plasma core by focusing a pulsed-laser beam inside a tube with a blind end, thus increasing the wave front pressure generated. Current amplification approach can reduce radiation exposure of the substrate from the shock wave because of the increased distance from the LIP core to the substrate provided by the increased pressure per unit pulse energy. For the same pulsed laser, with the aid of a shock tube, substantial levels of pressure amplitude amplification (8.95) and maximum pressure (6.48 MPa) are observed and reported.
- OSTI ID:
- 20972029
- Journal Information:
- Applied Physics Letters, Vol. 91, Issue 5; Other Information: DOI: 10.1063/1.2754359; (c) 2007 American Institute of Physics; Country of input: International Atomic Energy Agency (IAEA); ISSN 0003-6951
- Country of Publication:
- United States
- Language:
- English
Similar Records
Enhanced efficiency of laser shock cleaning process by geometrical confinement of laser-induced plasma
Increase of Acting Pressure by Adjusted Tool Geometry in Laser Shock Forming