Approaches to calculating AAPM TG-43 brachytherapy dosimetry parameters for {sup 137}Cs, {sup 125}I, {sup 192}Ir, {sup 103}Pd, and {sup 169}Yb sources
- Department of Radiation Oncology, Tufts University School of Medicine, Boston, Massachusetts 02111 (United States)
Underlying characteristics in brachytherapy dosimetry parameters for medical radionuclides {sup 137}Cs, {sup 125}I, {sup 192}Ir, {sup 103}Pd, and {sup 169}Yb were examined using Monte Carlo methods. Sources were modeled as unencapsulated point or line sources in liquid water to negate variations due to materials and construction. Importance of phantom size, mode of radiation transport physics--i.e., photon transport only or coupled photon:electron transport, phantom material, volume averaging, and Monte Carlo tally type were studied. For noninfinite media, g(r) was found to degrade as r approached R, the phantom radius. MCNP5 results were in agreement with those published using GEANT4. Brachytherapy dosimetry parameters calculated using coupled photon:electron radiation transport simulations did not differ significantly from those using photon transport only. Dose distributions from low-energy photon-emitting radionuclides {sup 125}I and {sup 103}Pd were sensitive to phantom material by upto a factor of 1.4 and 2.0, respectively, between tissue-equivalent materials and water at r=9 cm. In comparison, high-energy photons from {sup 137}Cs, {sup 192}Ir, and {sup 169}Yb demonstrated {+-}5% differences in dose distributions between water and tissue substitutes at r=20 cm. Similarly, volume-averaging effects were found to be more significant for low-energy radionuclides. When modeling line sources with L{<=}0.5 cm, the two-dimensional anisotropy function was largely within {+-}0.5% of unity for {sup 137}Cs, {sup 125}I, and {sup 192}Ir. However, an energy and geometry effect was noted for {sup 103}Pd and {sup 169}Yb, with {sub Pd-103}F(0.5,0 deg.)=1.05 and {sub Yb-169}F(0.5,0 deg.)=0.98 for L=0.5 cm. Simulations of monoenergetic photons for L=0.5 cm produced energy-dependent variations in F(r,{theta}) having a maximum value at 10 keV, minimum at 50 keV, and {approx}1.0 for higher-energy photons up to 750 keV. Both the F6 cell heating and track-length estimators were employed to determine brachytherapy dosimetry parameters. F6 was found to be necessary for g(r), while both tallies provided equivalent results for F(r,{theta})
- OSTI ID:
- 20853186
- Journal Information:
- Medical Physics, Vol. 33, Issue 6; Other Information: DOI: 10.1118/1.2199987; (c) 2006 American Association of Physicists in Medicine; Country of input: International Atomic Energy Agency (IAEA); ISSN 0094-2405
- Country of Publication:
- United States
- Language:
- English
Similar Records
SU-E-T-212: Comparison of TG-43 Dosimetric Parameters of Low and High Energy Brachytherapy Sources Obtained by MCNP Code Versions of 4C, X and 5
Study of encapsulated {sup 170}Tm sources for their potential use in brachytherapy