Brachytherapy source characterization for improved dose calculations using primary and scatter dose separation
- Nucletron Scandinavia AB, Box 1704, SE-751 47 Uppsala (Sweden)
In brachytherapy, tissue heterogeneities, source shielding, and finite patient/phantom extensions affect both the primary and scatter dose distributions. The primary dose is, due to the short range of secondary electrons, dependent only on the distribution of material located on the ray line between the source and dose deposition site. The scatter dose depends on both the direct irradiation pattern and the distribution of material in a large volume surrounding the point of interest, i.e., a much larger volume must be included in calculations to integrate many small dose contributions. It is therefore of interest to consider different methods for the primary and the scatter dose calculation to improve calculation accuracy with limited computer resources. The algorithms in present clinical use ignore these effects causing systematic dose errors in brachytherapy treatment planning. In this work we review a primary and scatter dose separation formalism (PSS) for brachytherapy source characterization to support separate calculation of the primary and scatter dose contributions. We show how the resulting source characterization data can be used to drive more accurate dose calculations using collapsed cone superposition for scatter dose calculations. Two types of source characterization data paths are used: a direct Monte Carlo simulation in water phantoms with subsequent parameterization of the results, and an alternative data path built on processing of AAPM TG43 formatted data to provide similar parameter sets. The latter path is motivated of the large amounts of data already existing in the TG43 format. We demonstrate the PSS methods using both data paths for a clinical {sup 192}Ir source. Results are shown for two geometries: a finite but homogeneous water phantom, and a half-slab consisting of water and air. The dose distributions are compared to results from full Monte Carlo simulations and we show significant improvement in scatter dose calculations when the collapsed-cone kernel-superposition algorithm is used compared to traditional table based calculations. The PSS source characterization method uses exponential fit functions derived from one-dimensional transport theory to describe both the primary and scatter dose contributions. We present data for the PSS characterization method to different {sup 192}Ir, {sup 137}Cs, and {sup 60}Cs brachytherapy sources. We also show how TG43 formatted data can be derived from our data to serve traditional treatment planning systems, as to enable for a gradual transfer to algorithms that provides improved modeling of heterogeneities in brachytherapy treatment planning.
- OSTI ID:
- 20726223
- Journal Information:
- Medical Physics, Vol. 32, Issue 9; Other Information: DOI: 10.1118/1.1949767; (c) 2005 American Association of Physicists in Medicine; Country of input: International Atomic Energy Agency (IAEA); ISSN 0094-2405
- Country of Publication:
- United States
- Language:
- English
Similar Records
TG-43 U1 based dosimetric characterization of model 67-6520 Cs-137 brachytherapy source
SU-F-BRA-11: An Experimental Commissioning Test of Brachytherapy MBDCA Dosimetry, Based On a Commercial Radiochromic Gel/optical CT System