Guidelines for Stretch Flanging Advanced High Strength Steels
- Mittal Steel U. S. A, Research and Development, 3001 E. Columbus Drive, E. Chicago, IN-46312 (United States)
Advanced High Strength Steels (AHSS) are currently being considered for use in closure and structural panels in the automotive industry because of their high potential for affordable weight reduction and improved performance. AHSS such as dual phase steels are currently being used in some vehicle platforms. From a manufacturing perspective, stretch flanging during stamping is an important deformation mode requiring careful consideration of geometry and the die process. This paper presents some geometric and process guidelines for stretch flanging AHSS. Hole expansion experiments were conducted to determine the failure limit for a sheared edge condition. Effects of punching clearance, prestrain and prior strain path on hole expansion were explored in these experiments. In addition, dynamic explicit FE calculations using LS-DYNA were also conducted for a typical stretch flange by varying some key geometric parameters. The experimental and FEA results were then analyzed to yield process and geometric guidelines to enable successful stretch flanging of AHSS.
- OSTI ID:
- 20726191
- Journal Information:
- AIP Conference Proceedings, Vol. 778, Issue 1; Conference: NUMISHEET 2005: 6. international conference and workshop on numerical simulation of 3D sheet metal forming process, Detroit, MI (United States), 15-19 Aug 2005; Other Information: DOI: 10.1063/1.2011301; (c) 2005 American Institute of Physics; Country of input: International Atomic Energy Agency (IAEA); ISSN 0094-243X
- Country of Publication:
- United States
- Language:
- English
Similar Records
Stretch flanging by a multiple-step forming process
Characterizing the stretch-flangeability of hot rolled multiphase steels