Determination of Anisotropic Hardening of Sheet Metals by Shear Tests
- Institute of Forming Technology and Lightweight Construction, University of Dortmund, D-44227 Dortmund (Germany)
With regard to the increasing necessity of accurate material data determination for the prediction of springback, a material testing equipment has been developed and set up for the measurement of material hardening within cyclic loading. One reason for inaccurate springback predictions can be seen in a missing consideration of load reversal effects in a realistic material model description. Due to bending and unbending while the material is drawn from the flange over a radius of a deep drawing tool, a hardening takes place which leads to an expanding or shifting of the elastic area and yield locus known as isotropic, kinematic, or combined hardening. Since springback is mainly influenced by the actual stress state and a correct distinction between elastic and elastic-plastic regions, an accurate prediction of these stress and strain components is basically required to simulate springback accurately, too. The presented testing method deals with shearing of sheet metal specimens in one or more load cycles to analyze the change of yield point and yield curve. The experimental set up is presented and discussed and the results are shown for different materials such as aluminum A199.5, stainless steel X5CrNi18.10, dual phase steel DP600, and copper Cu99.99. To guarantee a wide experimental range, different sheet thicknesses were used additionally. Simulations using the finite element method were carried out to compare the measured results with calculated results from different yield criterions and different hardening laws mentioned above. It was possible to show that commonly used standard material hardening laws like isotropic and kinematic hardening laws often do not lead to accurate stress state predictions when load reversals occur. The work shows the range of occurring differences and strategies to obtain to a more reliable prediction.
- OSTI ID:
- 20726152
- Journal Information:
- AIP Conference Proceedings, Vol. 778, Issue 1; Conference: NUMISHEET 2005: 6. international conference and workshop on numerical simulation of 3D sheet metal forming process, Detroit, MI (United States), 15-19 Aug 2005; Other Information: DOI: 10.1063/1.2011251; (c) 2005 American Institute of Physics; Country of input: International Atomic Energy Agency (IAEA); ISSN 0094-243X
- Country of Publication:
- United States
- Language:
- English
Similar Records
Kinematic Hardening: Characterization, Modeling and Impact on Springback Prediction
Study on the Influence of the Work Hardening Models Constitutive Parameters Identification in the Springback Prediction
Related Subjects
SUPERCONDUCTIVITY AND SUPERFLUIDITY
ALUMINIUM
ALUMINIUM ALLOYS
ANISOTROPY
BENDING
COMPARATIVE EVALUATIONS
COMPUTERIZED SIMULATION
COPPER
COPPER ALLOYS
DRAWING
FINITE ELEMENT METHOD
HARDNESS
LOADING
MATERIALS TESTING
PLASTICS
SHEAR
SHEETS
STAINLESS STEELS
STRAIN HARDENING
STRAINS
STRESSES